ZoneDirector

ZoneDirector

ZoneDirector

1.7K

  • •••
J
Replacing a router causes ZD1200 not to accept DHCP packets anymore?

so I have a simple site with 30 APs, cisco switch, a router, and a ZD1200. the router is pfsense - a software running on pretty much generic HW. I wanted to replace the router device (really simple procedure, just download config from old hw and upload if back to the new one), but after the swap, t

Question

43

3

0

ZD1200 and T310D not interlocked

Hi, This occurred during the process of connecting T310D to ZD1200. After the AP is linked to the controller, it receives a firmware upgrade and reboots, and the AP state on the controller is disconnect. And the same symptoms repeat over and over again and again. What should I check? ZD1200 ver

Question

25

1

0

Why you cannot block or ban a guest computer

if you have a web portal with allocated password... When the "guest" joins the wifi point under the zonedirector (10.4.1.0 build 226) they CANNOT ever be banned or blocked!!! clicking on "delete" or "block" in the zone director does nothing & they remain connected  and with access for t

Question

54

2

0

ZD1200 10.1.2.0 build 318

I have a ZD1200 handling 6 AP's currently running this code. I'd like to get it upgraded to some newer code.  I've been through release notes for all the 10.2 and 10.3 code and can't seem to find a supported upgrade path to get me on either 10.3 or 10.4, unless I've totally missed it.  Ca

Question

69

3

0

Is there ansible support for ZoneDirector 3000?

Hi! Is there ansible support for ZoneDirector 3000? I could use ansible with the icx module for Brocade Devices (7150 and 7250) but when I tried the same icx module for a ZD3000 I get an error. Is the ICX module supposed to support ZD3000? If not, which module would be used for ZD3000? Or is there

Question

44

1

0

Device Access Policy Allow IOS 14 or above on ZD1200

I configured Device Access Policy: to allow the connection of mobile devices using the iOS operating system.For devices using iOS 14 or above, the controller does not allow connection. Forum have information check which firmware can support ios 14 or higher connectivityI use zondirector ZD1200, firm

Question

56

0

0

ZoneDirector 1200 Firmware Upgrade

Hi all, I have a big project coming up next week to upgrade firmware of 2 x ZD1200 in Smart Redundancy mode, our current firmware is 9.10.2.0 build 29. Please could someone advise the upgrade path to the latest version, as I'm struggling to find our current build in newer versions. We are going t

Question

289

5

Accepted Solution

ZD1200

Hi community> we have 20 AP on network and 1 Zd1200 firmware 10.1.1.0 build 79. before accident everything was working fine.so after Zd1200 give us are problem we had to send to warranty then we update 10 AP to unleashed firmware 200.8.10.3.243 and 1 as Master .so now after receive my ZD1200 from

Question

228

4

0

Non network guys needs help with Zd1200 and R600/700/T300

I moved into a house with a ZD1200 and four APS (R600/700 & T300). We had some WiFi troubles so I ended up updating firmware on the ZoneDirector to 10.4.1.0 build 226. Since then no WiFi. I can access ZD and it shows only two APs, both of which are stuck at "Disconnected" or "Updating Firmware". Upd

Question

28

6

Accepted Solution

ZD 1200 Google Maps array.from error

Just got a new ZD 1200 on firmware 10.1.1.0 build 79 Getting this error after adding google maps api key: "This site overrides Array.from() with an implementation that doesn't support iterables, which could cause Google Maps JavaScript API v3 to not work correctly." Any ideas?

Question

156

1

0

Important Announcement

Announcements

Categories

View More