Unleashed

Unleashed

Unleashed

800

  • •••
T
Used R510 - No Webui or SSH Access

Good day, Acquired a pair of R510's, both should still be working. Customer's previous IT had them both working.  2.4 and 5.0 GHz lights lit up, no other Ruckus equipment or software onsite.  Powered via POE Injectors. We did not have admin access on these devices, customer replaced them

Question

149

1

0

Ruckus Unleashed's AP Conflict Handling

If I have a running unleashed wifi config with R510 (CONFIG A), and suddenly I plug an AP (either master or member) from another running network (CONFIG B) into same LAN a. will the configuration (CONFIG B) of the new added AP being overwritten with the running config (CONFIG A)? b. are there any

Question

37

1

0

Ruckus keeps dropping connection

Hello, recently moved into a Lennar new construction home and ruckus unleashed along with two APs R510 are included with the home. Amazon Services helped setup connection and everything seemed to be working initially. However, within a day, I stopped having access to the internet. I get internet ac

Question

724

1

0

Tuned ap off with app now cannot connect

so i turned off the ap last night on the app. this morning i tried to turn it back on and i get a popup on the app saying "you are not connnected to unleashed network.  got to settings."  when i search wifi points now, none of the ruckus wifi names show up.  i have done this many tim

Question

43

1

0

New Lennar home, a pair of R320 APs, and issues

Hey all, Like many, we purchased a new Lennar home that came with Ruckus access points and a switch. In our case, we have 2 R320 unleashed APs and a ICX7150-C12 switch. The APs are on the main level and upstairs. So far, it's been a struggle to keep things working well, so I'm looking for some advic

Question

194

2

0

how do i add a second WAP to my master ap

how do i add a second WAP to the master AP

Question

23

1

0

Accepted Solution

3 unleashed R310, client stickiness

Hi, I have 3 R310 unleashed AP’s, connected by wire (no roaming). two are on the ground floor (attached to ceiling), one on the second floor, facing down. when I am on the first floor, my clients (iPhone) keep connecting to the R310 attached on the ceiling of the floor below (ground floor).

Question

256

5

Lennar/AT&T configuration

My WiFi was great for the first year after having our Lennar built. Last February it all took a dump.  i have 1Gb up and down.  I have at least 30 Alexa enabled and smart devices requiring the use of my 2.4 band.  I try to keep everything other than that on my 5 band.  Not to me

Question

73

2

0

Why are my R610s stuck in updating mode?

All, I am currently implementing a system in which I have 6 APS for a residential install. There are (2) R710s one of these is the Master. Then there are four r610s. Before connecting these to the network, each was flashed over to Unleashed. They are now connected and the Ruckus phone app shows the

Question

33

1

0

WiFi Calling not working and log not showing up on R510

I configured it for both Verizon and ATT, and none work. I did enable WiFi calling on my cell, and I see it using Wifi, but the logs show nothing.

Question

119

2

0

Important Announcement

Announcements

Categories

View More