Switches

Switches

Switches

526

  • •••
J
ICX7150-C12-Switch admin username and password

Hi, I am 100% new to this and don't know much so bare with me. On the unleashed dashboard it shows I can add my switch to it. ive also noticed I needed to upgrade my firmware to 08.0.90 or later. "was running 08.0.80(something). I upgraded the boot and firmware to 08.0.90d, (UFI). I have check and

Question

2K

2

0

Accepted Solution

Official Solution

ICX 7150 stack unconfigure unit # not working ? 08.0.90jT211

Hello, We are installing a group of stack 7150 switches. When In place we saw that a few stacks are having more or less Switches as required. so the problem is when trying to remove the units that will not be necessary the master switch of the stack is not accepting the unit number and saying that i

Question

174

1

0

Accepted Solution

ICX 7850 Switch EOL

Greeting first of all, i hope to you company develops. I can't find ICX 7850 Switch End of Service(or End of Life) date. so where can i find ICX 7850 Switch End of Service(or End of Life) date? or could you know to me ICX 7850 Switch End of Service(or End of Life) date. Thank you 

Question

48

3

0

Accepted Solution

Configure RADIUS authentication with WiFi and ICX 7150

Hi, Does anyone have a good reference on configuring 802.1x for both WiFi and port security (on ICX 7150)? Using Ruckus Cloud, it looks pretty simple to add the RADIUS server and get authentication going for a SSID, but I am pretty sure there is more to it than just that :). And reading through the

Question

199

3

0

Accepted Solution

Stacking an ICX 7150-24p with an ICX 7150-C12p

Hello, can someone please tell me if i can stack an ICX 7150-24p with an ICX 7150-C12p and maybe why? Thank You

Question

52

1

VPN duplicate ISAKMP message received ICX-7450

Hub and Spoke topology with multiple IPSEC tunnels going from the Hub to remote spokes for centralized licensing of software. 3 active tunnels, all with identical configurations, minus unique source/destination/authentication combos. 4th area, has the same configurations as the 3 active, again with

Question

22

2

0

Accepted Solution

Official Solution

Basic questions about the ICX 7450 - 8.0.80j

I'm brand new to the Ruckus 7450 switches (and to using ruckus in general) I've been able to update the software to the latest recommended GA version, but I'm coming from Cisco so I have some questions and I didn't see it in the documentation (I probably missed it) In the cisco world I would open an

Question

118

1

0

Accepted Solution

Official Solution

Configuring SFP port on 7150-C08p

Hi, I have a pair of 7150-C08p switches. We installed a 1GbE optical gbic in 1/2/1 on each switch and patched them together... We are not getting any link. I am trying to determine if this is a: Switch config issue? GBIC compatibility issue? Cabling issue? The switches see the gbic installed, but

Question

114

6

0

Accepted Solution

Brocade FastIron CX Series Switches:

Brocade FastIron CX Series Switches: FCX-624 and FCX-648 I need the EOSL  & EOS date for the same.

Question

15

1

0

802.1x configuration

Hello everyone, i am trying to configure 802.1x authentication with icx 7150. We have done the following configuration and test client has successfully authenticated with Cloudpath as our Radius Server but somehow after client is authenticated, client is not being move to the correct Vlan. Not sure

Question

143

1

0

Important Announcement

Announcements

Categories

View More