Switches

Switches

Switches

526

  • •••
LED issue with icx7150-24/48p

Hi team We facing an issue with ports LED behavior the POE led not work, we have try to connect AP And IP phone but the POE led not work  Note that when i login to web of the switch i see everything working fine 

Question

16

0

0

Accepted Solution

ICX 7150 default login

Hi Does anyone know the default login to ICX 7150 24P? I thought it was username: Super and password was spadmin?

Question

243

5

ICX 7150 C10ZP

What is the default login tried username :super password: sp-admin No Joy :-(

Question

15

0

0

Switch config suppot Ruckus icx7150-24p

Hi, I am configuring two switches a 24P and 8port.  The 8 port is to have two access points on it and the 24P will have have the rest of the network hanging off it. I have set the ip address of the switch to (for example) 192.168.x.x 255.255.255.0, on CISCO this normally set the management v

Question

20

0

0

Accepted Solution

802.1w implementation clarification questions

I am playing around with a config with 50ish VLANs defined. I tried adding "spanning-tree 802-1w" command to each VLAN, but after 32 I get “error - start spanning tree on this vlan/vlan-group would exceed the maximum stp instance 32 limit”. If the switch can handle 254 instances of STP (

Question

168

1

0

ICX7150 With 8.0.95: Multiple SSH fails

Upgraded our ICX7150 Switch from 8.0.90 version to 8.0.95 version and found out there are issues with SSH connection. Multiple SSH connections from the same PC can not be supported. Old version does not have such issue though and other switches in OS 08.0.90 version work fine . If I opened a SSH co

Question

26

0

Accepted Solution

BUM Suppression Logging

Hello All. I've enabled BUM on three eth ports that have production, domain workstations connected to them.  I configured rate-limit-log 1 globally.  Below is what I have configured per port  broadcast limit 1 kbps log multicast limit 1 kbps log unknown-unicast limit 1 kbp

Question

33

2

0

Could not assign ip address

I am configurating IXC7150-C12-2X1G. I could not assign IP address for switchSomeone can help me please.UNIT 1: compiled on Aug 28 2019 at 13:38:53 labeled as SPR08090c      (32536860 bytes) from Primary SPR08090c.bin (UFI)        SW: Version 08.0.90cT213       Compressed Primary Boot Code size = 78

Question

 • 

Answered

352

3

Managed ICX 7150 Stack Switches after a reboot change UFI to non-UFI ?

Hello pack ! I am having trouble in 2 stack of switches that after a reboot by unknown reason somehow "managed" to change their ufi to non-ufi firmware even if they keeped the same version. So the situation is that group of switches of a specific building, which were already managed by the smartz

Question

105

1

0

Accepted Solution

ICX 7150 -TFTP issues

hello experts, I have two ICX switches 7150 . * I was trying to copy the configuration from the switch to TFTP or vise versa * The TFTP and the switch are on the same subnet , ping successful from the laptop to switch , Ping failed from switch to laptop  _ I left the switch port that con

Question

68

3

Important Announcement

Announcements

Categories

View More