Switches

Switches

Switches

563

  • •••
J
Routing Public LAN (/28 block) over Peer to Peer (/29 Block) Gateway Connection

Comcast ran an EDI circuit (Metro Fiber) to our office. They originally gave us. /29 block but we needed additional public addresses. I am able to assign any of the useable addresses from the /29 block and use the gateway that is in the same subnet without any issues. What is new for me and where I

Question

26

0

0

Accepted Solution

Non-blocking throughput?

What is the Non-blocking throughput of the ICX7150-24P (or any ICX switch)? Can't find this anywhere. The data sheet mentions Non-blocking throughput, but that's it. I assume that means that the switches have a Non-blocking design, but hoping to confirm that.  Thank you.

Question

107

1

0

ICX7250 , port security: mac address is refreshed on interface and not moved...

Hi, since last december I have this security warning on our ICX 7250 switches where port security is enabled, its happening randomly on some ports.It's not a "violation", but a "refreshed" ?!?Example of today:W:Security: Port Security secure MAC address xxxx.xxxx.9c91 is refreshed on interface ether

Question

86

1

ICX 7150 Switch Layer 2

Hi, I have a new Layer 2 ICX 7150 switch and I want to connect it to 6 access points Ruckus R550. what I want to ask is how to configure the syntax to connect the switch to the access point, because here I am familiar with Cisco's device settings. Here is the configuration I want to plan to do: #c

Question

102

1

0

Problem routing public lan out over peer to peer up block with gateway

Issue routing public lan up block to peer to peer block with gateway

Question

26

3

0

Accepted Solution

stacking over copper ICX 7250

hello All, can we do a stacking if we connect copper transceiver to uplink port on ICX7250-48P-2X10G ??  

Question

117

2

0

stackwise virtual

Good afternoon Ruckus forum Nice to greet you, I have a specific question about the technology that Cisco handles called virtual stackwise, in RUCKUS we have something similar? Also consider which switch models we can perform virtual stacking on. I appreciate the support

Question

64

1

0

Does ICX 7250s support SFP+ from other vendor such Aruba

Does ICX 7250s support  SFP+ from other vendor such Aruba 

Question

136

2

0

illegal class reported by PD

I have a Ruckus ICX 7450-48P that is having issues with a few new wireless access points. Under inline power I am getting a fault error "illegal class reported by PD" for 4 of these ports with these access points.  There are 2 other of these same exact APs plugged into 2 different ports that w

Question

73

1

Accepted Solution

VLANs and the ICX7150-C08P

Hi All! I received my ICX7150-C08P along with an R610 to replace my Ubiquiti gear. My current network configuration is Verizon ONT to pfSense on a Dell r210 -> Ubiquiti 8 port PoE switch -> Ubiquiti AC-Pro AP. I have 3 wireless LANs, one guest, one normal use, and one for the work laptops. Th

Question

289

2

Important Announcement

Announcements

Categories

View More