Switches

Switches

Switches

563

  • •••
J
Brocade to Dell switch lag issue

Having issues configuring a new Dynamic Lag between Brocade ICX 6610 to Dell s4112t-on, both switches on the latest firmware. Configuration looks good on both sides but no success.  I have tested the Dell switch to a cisco switch I had recently taken out of service and that lag works.  I

Question

138

2

0

Accepted Solution

Ruckus Connection with Fibre network

I have a Ziply-FIber ethernet cable coming into my home. Can I connect this directly to the ICX 7150 or do I need to get through a router?

Question

33

1

0

Accepted Solution

Upgrading Firmware ICX from SmarZone, is it wipe the ICX configuration?

Hi all, I want to upgrade the ICX firmware and there are many switch with across location (more than 100 units). Is the configuration will be wipe/removed when I upgrade the firmware from the SmartZone? (beside the Backup and Restore config) Thanks

Question

41

1

0

Does ICX Ruckus switches support finisar sfp ?

Does ICX Ruckus switches support finisar sfp ?

Question

32

1

0

Accepted Solution

Help with ICX 7150s and stp deployment

Hey guys. I'm about to replace our current network switches (HPs) with brocade icx 7150 and I need your help. Here is my scenario: ICX 6430-48 (stack): this is the core or distribution switch (this is going to stay in place until I replace the access switches) Port 2/1/33 is tagged in all vlans (2,

Question

158

4

0

How to use Server based DHCP with ICX switches

Hi, currently trying to get dhcp to work with a few new 7150's we dhcp running on one of our server connected to the primary switch. We have multiple subnets for various areas. but can figure out how to use the switch as a relay for dhcp.

Question

158

2

0

Accepted Solution

ICX 7150 VLAN 1

Hi, I'm new to icx's. I have a 7150-24P. I'm trying to configure ethernet 1/1/24 as the uplink port so I tagged in all vlans except vlan1 (default vlan, which I don't use). When I run sh runn this is showing on vlan 1, is this normal or is there something wrong? I don't want or need to use vlan 1 a

Question

64

1

0

VLAN 1 is not working on stack mode

Dear All, First off please excuses me English isn't my native language. We have two of Brocade ICX7250-48P stacked, the idea behind is to accomplish a failover , whenever switch one is down we will remain online because each server will have two ports connected to each switch. the issue is Switch nu

Question

62

4

0

ICX7250P POE Daughterboard Replacement?

HiI have obtained a ICX7250P with 08.0.95ba Firmware The switch works normally, but the POE Module Reports:- Severe Error - Module Failed to Init. I have reloaded the Boot, Image and POE Firmware with no effect. The switch works normally, the POE module fails to initialise. On closer internal ins

Question

26

1

0

SSH Stops after 2 weeks

We have multiple ICX 7750 and 7450 in our DCs. Randomly we get SSH failing after approx 2 to 4 weeks. To fix we have to go to DC and console onto device and apply crypto zeroise then crypto generate CLI commands. This is impacting and time consuming. Any ideas why it is doing this? Code version is 8

Question

473

6

Important Announcement

Announcements

Categories

View More