SmartCell Access Points

SmartCell Access Points

SmartCell Access Points

60

  • •••
Hi there, we have a VSZ with 37 AP connected. All APs has an IP address but cannot connect to them with a rowser. Can anyone help me ?

Hi everybody. How ton connect to R310 AP with a web browser wheres the AP are connecte to a VSZ ?

Question

2

1

Why is Wifi Calling (VoWIFI) not working with tunnel mode with Smartzone?

Hi,I have a working setup Wifi Calling. APs and Smartzone100 is on same management VLAN. When local switching - tunnel mode on SSID is disabled Wifi Calling (VoWIFI) is working. When I turn on Tunnel mode it is not.All is configured with "default MTU" configuration. All L3 interfaces set to standard

Question

45

2

Cisco 7925s not connecting to new WLAN.

We are running a Smartzone 100 with R510 and R710 APs. We have 3 WLANs set up, and have added a 4th to separate our Cisco 7925s from other voice devices. The 7925s will not connect to the new SSID however. Testing with laptops and mobile phones show that these devices will connect and obtain an addr

Question

2

1

Ruckus R600, Guest AP on a seperate VLAN to isolate guests from internal network

Is this possible with R600 in Cloud Wifi OS mode?

Question

7

0

What kind of AP and controller should I use, if I want to have URL and Application filter on the wifi network?

Hi there. Please help me, what kind of AP and controller should I use, if I want to have URL and Application filter on the wifi network? Thanks!

Question

5

2

Smartzone WAP status OID

Recently migrated a client from ZD to SZ cluster.  They use SolarWinds for monitoring.  Are there different OIDs for SZ controller WAPs compared to ZD controlled ones?  Currently SolarWinds is not reporting on any WAP status changes.

Question

29

2

Connecting wifi extender with Ruckus AP

I am trying to use TP Link TL-WA854RE with Ruckus AP. AP is controller managed AP. I have tried disabling directedDHCP as well. How can I check whether this model is compatible or not with Ruckus APs? Can I use portal based SSIDs? Once I try to connect I get error in mobile 'failed to obtain IP

Question

236

1

Ruckus AP sending ARP Request to 255.255.255.255

Hi Guys, Ruckus AP is sending ARP request for broadcast IP address as attached in the snapshot.Do any one have idea why this happens? thanksgpmpa

Question

20

2

Does SZ support LACP using 2x eth port or 4x ethport ?

Hi all.SZ100 have four eth port.I wonder SZ100 could lacp using his ports.Does SZ100 support LACP using his 2x eth port or 4 x eth port?If it isn't available, Why SZ100 has four eth port?Some customer want to bind port using lacp to increase data-tunnel throughput.Plz let me know about it.

Question

 • 

Answered

8

1

SCG200 Island SSID issue

I would like to ask if we could disable the island SSID after the AP lost connect to SCG.I tried to set recovery-ssid service-wlan disable, and found not work.For standalone AP method, set wlan102 state down...also not work.Any command could disable the island ssid even the Ap lost connect to SCg

Question

 • 

Answered

21

1

Important Announcement

Announcements

Categories

View More