SmartCell Access Points

SmartCell Access Points

SmartCell Access Points

60

  • •••
SCG/SZ AP CLI Script to get info for all APs

I have a need to audit the uplink interfaces for all APs on a monthly basis for PHY link speed (100M, or 1Gbps).Support told me that the only way is to manually check every single AP individually via the GUI or with the CLI command below.# remote ap-cli "get netstats "I was wondering if there was s

Question

 • 

Answered

201

2

What is the minimum standalone firmware version to connect AP to vSZ

How can I find minimum AP standalone Firmware version required to connect AP to vSZ 5.1

Question

 • 

Answered

153

3

Is it possible to select which SCG node we can perform the firmware upgrade?

Is it possible to select which SCG node we can perform the firmware upgrade? We are running a 2 node SCG200 and wanted to know if it's possible to select the node to perform an upgrade.

Question

 • 

Answered

18

3

Decreased battery life on company WiFi

our mobile phones have a decreased battery life, when they are in the company wifi. if they are off the company wifi or in a wifi in the employees homes, battery life is normal.we are using vSZ with R700/R710 APs. are there any settings we could try?

Question

191

6

how to change the APs ip setting to static quickly

Hi guys,i want to  changed the APs' ip setting to Static in sz100, but I have more than 300 ap, if any method such as script file  to do this quickly?

Question

427

2

AP firmware 3.6.0.0.709 High Connection Errors

I have upgraded my Vsz to 3.6.0.0.510 and upgraded the APs to 3.6.0.0.709.  After the upgrade i noticed that almost every AP had a high percentage of connection errors.  I let it go for several days and thought i still had a lot of clients connected so it must be working.  In the events I see a lot

Question

 • 

Answered

117

19

configuration hotspot(WisPr) local in VSZ-High

Hi,I'm setting up a Hotspot on the Virtual Smart Zone - High 3.2 ruckus platform. For this I turn to AP Zone >> Hotspot (WISPr) PortalI would like to try the Hotspot portal locally. I make the configurations as they are:AP Zone>>WLAN Services & Groups Authentication Type: Hotspot (WISPr)Hotspot (WIS

Question

13

1

We can connect to SSID , but unable to connect to the Internet.

Sometime,We can connect to SSID ,but unable to connect to the Internet (some people will happen )Ruckus R500*120 ZD1200*1  (Version: 10.1.0.0 build 1515)Can't see error message from LOG when a problem occurs.

Question

175

2

How to disable Reset button on APs ?

Please advise if its possible to disable the reset button option mainly of H510 AP and dhow We want this for extra security and to avoid guests reseting APsI have searched the forum - and found nothing specific - hope I didnt miss somehting.

Question

 • 

Answered

39

3

Batch Provisioning for APs with Virtual SmartZone

Is there any more detailed documentation available for batch provisioning of AP's with the Virtual SmartZone?   The (very brief) mention of the feature in the administration manual mentions that you can export a blank file with headers (so far so good) but doesn't describe any of the columns and doe

Question

 • 

Answered

212

4

Important Announcement

Announcements

Categories

View More