ASK the Pack
SmartCell Access Points
I am trying to do the migration from an ZD1200 to vSN-e. Therefore I have now two R510 in a test-enviroment connected to an brandnew installed vSN-e (I do not use the automatically migrating-service by vSN-e!!).I do have the problem, that the two R510 do not activate the WLAN-RADIO. I have successfu
I can't seem to figure out how to disable 2.4ghz on a SSID. All other posts seem to talk about the ZD and they don't seem to be the same. vSZ is running 3.5.1. If we create the WLAN group and then create the AP group, there doesn't seem to be a way to disable 2.4 in the AP group. Is it CLI only? Hel
I have many sites on two different vSZ-H controllers.
Two sites only show this problem:
I rename APs using the "Access Point" configuration menu. When I switch to "Monitor APs" these APs show AP Name as "MyRouter". If I go to the "Configuration" menu again, the APs show the names I gave them.
May I ask, if the P300 is connected to a switch trunk port, likewise with the other P300, does it passthrough all the configured vlan's?
Hello,We run a sparsely distributed WiFi hotspot network on our own infrastructure which supports frame sizes beyond 2000bytes in all network segments.Currently we are dependant on using the "Tunnel WLAN traffic through Ruckus GRE" feature but aren't able to set the Tunnel MTU past 1500 or Auto as p
I have a AP R320 and try to configure following the Quick setup guide, but in the step 5 when used de web interface (Edge, Mozila, Crome), they do not access to de AP and do not appear the Admin login menu.
hi, please tell me how to enable only 2.4 GHz in ZoneDirector for a certain network. and for another 5 GHz?
I have a project where customer says that he needs:1. MAC authorization in WLAN;2. ACL entries number should be more that 8k.I can't find in docs what is the limit of ACL entries number for any type of ACL (l2, l3/l4). So — how much MACs can I use to authorization? How much MACs can I add to ACL on
Trying to follow this example (https://docs.arris.com/bundle/sz-510-WISPrPortalReferenceguide-sz100,vsz/page/GUID-0C63DD21-399E-43DF-BBAA-E860A2A1BD13.html) but stuck as getting the users "Mac address". Does anyone know of a way or programing language that can retrieve this. Does anyone have an exam
Hello,We have a production SZ-124 we need to move from an old network to a new segment. From other posts I've read the best way to do this is to run an AP CLI script to "set scg ip " on all the APs before you change the controller's management IP.We also plan on updating the DNS entry used for disc