SmartCell Access Points

SmartCell Access Points

SmartCell Access Points

62

  • •••
H
ZF7982 standalone mode - can not use Google Chromecast

I am using ZF7982, standalone mode and facing this issue: when i use Google Chromecast to cast from my laptop to my home TV, the video casting on TV is lagged, unable to watch. I didnt get this issue when used ASUS NT-R12. I wonder if any special setting on ZF7982 for casting service?

Question

16

1

0

To upgrade firmware/software or not

Hi, need your advice, in 2009 have bought and set-up (as backup line) Zone director 1000 2 AP’s zf2942 From there I didn’t have any problems, didn’t touch config for more than 10 years, now I am experiencing network issues, and doubting on ISP, never the less I am checking all components

Question

22

1

0

AP-SCG does not activat the WLAN-RADIO / new installation of a SmartZone Essential

I am trying to do the migration from an ZD1200 to vSN-e. Therefore I have now two R510 in a test-enviroment connected to an brandnew installed vSN-e (I do not use the automatically migrating-service by vSN-e!!).I do have the problem, that the two R510 do not activate the WLAN-RADIO. I have successfu

Question

77

5

vSZ HS and disabling 2.4ghz on an SSID

I can't seem to figure out how to disable 2.4ghz on a SSID. All other posts seem to talk about the ZD and they don't seem to be the same. vSZ is running 3.5.1. If we create the WLAN group and then create the AP group, there doesn't seem to be a way to disable 2.4 in the AP group. Is it CLI only? Hel

Question

 • 

Answered

923

12

AP Name incorrect

I have many sites on two different vSZ-H controllers. Two sites only show this problem: I rename APs using the "Access Point" configuration menu. When I switch to "Monitor APs" these APs show AP Name as "MyRouter". If I go to the "Configuration" menu again, the APs show the names I gave them. Th

Question

24

2

0

P300 is it VLAN passthrough?

Team, May I ask, if the P300 is connected to a switch trunk port, likewise with the other P300, does it passthrough all the configured vlan's? Regards, Jes

Question

40

1

0

GRE / Centralized Forwarding MTU - Jumbo frames?

Hello,We run a sparsely distributed WiFi hotspot network on our own infrastructure which supports frame sizes beyond 2000bytes in all network segments.Currently we are dependant on using the "Tunnel WLAN traffic through Ruckus GRE" feature but aren't able to set the Tunnel MTU past 1500 or Auto as p

Question

139

2

Configuration AP R320

I have a AP R320 and try to configure following the Quick setup guide, but in the step 5 when used de web interface (Edge, Mozila, Crome), they do not access to de AP and do not appear the Admin login menu.

Question

153

1

0

5 GHz / 2.4 GHz

hi, please tell me how to enable only 2.4 GHz in ZoneDirector for a certain network. and for another 5 GHz?

Question

31

1

0

How many entries can I add to ACLs on SZ100?

I have a project where customer says that he needs:1. MAC authorization in WLAN;2. ACL entries number should be more that 8k.I can't find in docs what is the limit of ACL entries number for any type of ACL (l2, l3/l4). So — how much MACs can I use to authorization? How much MACs can I add to ACL on

Question

298

5

Important Announcement

Announcements

Categories

View More