ASK the Pack
SmartCell Access Points
I can't seem to figure out how to disable 2.4ghz on a SSID. All other posts seem to talk about the ZD and they don't seem to be the same. vSZ is runni
3 y ago
Last response by
4 m ago
I have many sites on two different vSZ-H controllers.
Two sites only show this problem:
I rename APs using the "Access Point" configuration menu. Wh
May I ask, if the P300 is connected to a switch trunk port, likewise with the other P300, does it passthrough all the configured vlan's?
Hello,We run a sparsely distributed WiFi hotspot network on our own infrastructure which supports frame sizes beyond 2000bytes in all network segments
5 m ago
I have a AP R320 and try to configure following the Quick setup guide, but in the step 5 when used de web interface (Edge, Mozila, Crome), they do not
hi, please tell me how to enable only 2.4 GHz in ZoneDirector for a certain network. and for another 5 GHz?
I have a project where customer says that he needs:1. MAC authorization in WLAN;2. ACL entries number should be more that 8k.I can't find in docs what
5 y ago
6 m ago
Trying to follow this example (https://docs.arris.com/bundle/sz-510-WISPrPortalReferenceguide-sz100,vsz/page/GUID-0C63DD21-399E-43DF-BBAA-E860A2A1BD13
10 m ago
Hello,We have a production SZ-124 we need to move from an old network to a new segment. From other posts I've read the best way to do this is to run
1 y ago
I have a need to audit the uplink interfaces for all APs on a monthly basis for PHY link speed (100M, or 1Gbps).Support told me that the only way is t