Skip to main content
RUCKUS Outdoor APs

RUCKUS Outdoor APs

Outdoor access points

270

  • •••
T750 on vSZH 5.2 with vSZD also will not provide DHCP address for client connections

I have looked at the troubleshooting area on the controller for my test client and I noticed the difference between a good complete connection from th

Question

22

1

0

Accepted Solution

ZF7782 and PoE on second eth port

Hello, we have several ZF7782 still operating in our network, and I'm looking to utilize the second ethernet port with PoE.  We're currently running t

 posted 

4 months ago

 • 

Last response by 

john_olsthoorn 

2 months ago

Question

32

3

0

Default SNMP community in T310C and T310D?

Not in user guide. How does one set a community or see the default SNMP community in T310C and T310D in standalone mode? FW is 114.0.0.0.1360 Many tha

 posted 

2 months ago

 • 

Last response by 

mitchell_axtell 

2 months ago

Question

18

2

0

Engineering Cut Sheet

I am looking for CAD drawing of the T310d. The only documentation I can find on the sizes of the APs are located on the spec pdf.  The project m

Question

15

2

0

Many STA-DISASSOC-REASON with reason=1 and ack_rssi=0

In our network of ZF7782 APs (mostly), we're seeing many log STA-DISASSOC-REASON with stable clients. Most of our users are locked to specific APs an

 posted 

4 months ago

 • 

Last response by 

jason_reich 

4 months ago

Question

23

2

0

Short vs. Long Guard Interval Controls on SmartZone

Does anyone know where you can configure short/long Guard Interval  (SGI / LGI) on SmartZone controlled APs?  I have an outdoor deployment I think may

Question

191

1

T710 downlink speed much slower than uplink with unleashed firmware

I tried  latest 7/8/9 , all of them I got around 250Mbps/800Mbps. Downlink is around 1/3 of uplink speed.

 posted 

5 months ago

 • 

Last response by 

syamantak_omer 

5 months ago

Question

6

1

T710 can't be powered on with 802.3at compatible switch

I flashed the AP to unleashed 200.8 for now. I tried two switches, both support 802.3at, one is ubnt es-8-150W , the other is

 posted 

5 months ago

 • 

Last response by 

anton_kuzmin 

5 months ago

Question

4

1

Query : Access point Should also allow Signal rejection for 3G/LTE/WiMAX in a co-Located environment

Should also allow Signal rejection for 3G/LTE/WiMAX in a co-Located environment

Question

6

0

7762 configuration for range and coverage

I’m facing a small issue with my outdoor kit. I have successfully managed to setup the AP 7762 with a ZD1106. However configured to operate at full

Question

3

2

Announcements