I am looking for CAD drawing of the T310d. The only documentation I can find on the sizes of the APs are located on the spec pdf.  The project m

In our network of ZF7782 APs (mostly), we're seeing many log STA-DISASSOC-REASON with stable clients. Most of our users are locked to specific APs an

Hello, we have several ZF7782 still operating in our network, and I'm looking to utilize the second ethernet port with PoE.  We're currently running t

Does anyone know where you can configure short/long Guard Interval  (SGI / LGI) on SmartZone controlled APs?  I have an outdoor deployment I think may

I tried  latest 7/8/9 , all of them I got around 250Mbps/800Mbps. Downlink is around 1/3 of uplink speed.

I flashed the AP to unleashed 200.8 for now. I tried two switches, both support 802.3at, one is ubnt es-8-150W , the other is

Should also allow Signal rejection for 3G/LTE/WiMAX in a co-Located environment

I’m facing a small issue with my outdoor kit. I have successfully managed to setup the AP 7762 with a ZD1106. However configured to operate at full

i haven't been able to locate any documentation which describes how to mount the T310c.parallel to ground or perpendicular> and recommend height from

we have a ZD 3050 running firmware 10.1.1..0.42 and wanted to add two additional ZF 7782 with firmware 9.8 for some reasons the ZD is trying to update