ASK the Pack
RUCKUS Indoor APs
Consider this. A 7372 with the same SSID on both bands. Some clients connected via 5Ghz and some at 2.4Ghz. Would I see any performance issues with
I've got three APs, each broadcasting 2 SSID's. When a user selects one WLAN, they get an address on network A. When a user slects the other, they get
My zf 7962 and 7982 AP's won't connect after upgrading the ZD3025 to 9.6 from 184.108.40.206 build 15. They do connect when I downgrade back to 220.127.116.11 build
ZF7321 is single band selectable. Single band only meshes with other single band APs.
Can someone confirm that when 2.4GHZ is selected, mesh works wi
Tomorrow a festival of 100K+ people fires up across the street from our building. I have a ZD1100 with 16 7363 APs running 9.5.1 bld 50. We use iPad
Im going to set up a site-to-site vpn between two offices that we have.
Is there any best practice how to arrange this?
Im need the APs on office 2
Hello we have installed 4 stand alone 7352 AP's without a Zone Director. Is there a way we can change the WPA2 password other than connecting directly
Kicking the tires on a 7982 running 9.4 firmware. Hooked the WAP up to a Netgear GSM712 switch, but on gig-speeds both the switch and the WAP show th
I have an 7363 and DHCP service doesn ́t assign IP addresses on wireless clients. I upgraded firmware to 18.104.22.168.267 but the problem r
I'm examining logs on my Ruckus AP and have discovered that some of the error messages aren't easily understood, probably due the fact that I haven't