I'm working on setting up a 4 unit stack of ICX 6450-48s.  Firmware installed is 8.0.3n - Routing.  I am getting a continuous stream of the following

I have ICX 7450 and have purchased Prem LIC for L3 Routing. Now ICX7450-PREM-LIC- SW is showing non complaint. what should do next. is it okay or need

Are there plans to release any newer firmware versions on the ICX 64XX series?  We really need some of the features that are in 08.0.50 and newer, but

Hi , i try to make dot1x configuration but i get this information. How to resolve it ?  [email protected]_B28-P1(config-authen)#dot1x enable ethernet 2/1/2E

Hello,I'm planning to upgrade my ICX switches (I have a bunch of them). They are at versions 08030e and 08030k. I'm new in brocade technology and I'm

I've installed a couple of Ruckus ICX 7150 switches with no configuration and I would like to configure them remotely but when I ssh in, it wants a pa

I've got a 7750 as my core router and 1GB connections to 9 sites with 7450 routers.  7 of the connections work and 2 do not.  As far as I can tell, th

I have a VAR who setup an ICX-7450 and I'm interested in what the best practice is.He put router code on the primary and switch code on the secondary.

Going through the documentation (which is pretty shoddy) I can't seem to figure this out. My best guess, from what I've read, is:Unzip firmware distri

We have ICX 7450 switch as distribution switch and below that we have 5 nos HP 5120 as access switches  in a Ring Topology. We have connected one port