Skip to main content
RUCKUS ICX Switches

RUCKUS ICX Switches

RUCKUS ICX Switches

438

  • •••
ICX series Switches are suporting PAT(Port address translate) or NAT(Network Address Translate) ?

I can't find this contents in datasheet & Ruckus FastIron Administration Guide, Does ICX7450 switch require a lincense to use NAT funtion ?

Question

42

1

updating FWS firmware using TFTP

I have a Brocade FWS648G switch which I received as RMA. I have assigned an IP to switch and same range ip address to the PC.I am able to ping or ssh

Question

17

2

ping from config menu

Hi,I have FCX648SHow can I do ping from configuration menuQuite hassle if have to exit from config menu to do pingtq

 posted 

3 years ago

 • 

Last response by 

nbctcp 

3 years ago

Question

4

3

Creating VLAN without port

Hi,I have FCX6485 version  08.0.30sT7f3 I want to create a new vlan without assigning portIn CiscoSwitch(config)# vlan 20Switch(config-vlan)# name vl

 posted 

3 years ago

 • 

Last response by 

nbctcp 

3 years ago

Question

27

3

Choosing core switch for network system (wifi, camera and IPTV)

Can anyone here help me chooses core switch for wifi, camera and IPTV system for hotel with 26 floors, each floor have 12 rooms. Each floor I use 12 A

 posted 

3 years ago

 • 

Last response by 

justin_birkhofer 

3 years ago

Question

 • 

Answered

15

2

ICX7250 L3 DUAL ISP Load Balance?

Is this possible on the ICX platform?I'm assuming no, as NAT and other L3 services aren't yet available, but are planned.

Question

2

1

TDR cable diagnostics only works on master switch in a stack

Trying to avoid opening a case unless I have to.  We have noticed that the TDR cable diagnostics works on the master switch in the stack, but not on a

Question

8

1

multiple sflow destinations

When defining multiple sflow destinations, does the switch round robin between the two or does it send the same data to all configured destinations? 

Question

 • 

Answered

2

1

Error “The first key-exchange algorithm supported by the server is diffie-hellman-group1-sha1”

I have old FCX 6485.Every time I connect through putty. I got error above.I can solve that using this methodhttps://nbctcp.wordpress.com/2018/02/01/er

 posted 

3 years ago

 • 

Last response by 

nbctcp 

3 years ago

Question

235

1

ICX 6450 PoE Allocation Issue

I have two ICX 6450 24P switches at my garage. They run PoE for VoIP, Access Control and Cameras. I had a report that the cameras were no longer worki

Question

34

1

Announcements