Conversations
Conversations 161 - 180 of 5702
I have a ZD controller, 10 APs and 10 SZ licenses for APs. Can't I use these licenses on these APs to be controlled by ZD?
Can we use SmartZone APs licenses on the ZoneDirector1200 controller?
Can we use SmartZone APs licenses on the ZoneDirector1200 controller?
Is there limitation for maximum number of MAC Address per VLAN in AP or WLC ?
Many switches specification for the maximum number of MAC Address can handle per VLAN. so Is there such a limitation or recommended limi...
No Ruckus unleashed app
Hello I am trying to download the Ruckus Unleashed app for IOS. However when I go to search for it it can’t be found.,
vSZ-H cannot view existing WLANs
Has anyone else stumbled across on their vSZ when navigating under the "Wireless LANs" they can no longer see any of their WLANs that the...
Where do you reboot your SmartZone 100 sz100?
I have been all over the interface and still cannot locate a place where you can click on a button that will reboot the smartzone 100.SZ1...
Unable to upgrade the R500 unleashed AP firmware
Hi All, I'm having R500 Unleashed AP. AP is having 200.9.9.608 firmware and it is not allowing me to upgrade the firmware to higher versi...
ZoneFlex R500 configuration
Hello.I have a single ZF-R500 AP and I did a factory reset. I can't configure anything except the two eth ports - everything else (includ...
ICX switch is not registering to SZ100
Hi all,I'm quite new to configuring Ruckus products and new to configuring a smartzone in general and I'm having a little trouble getting...
smart zone 100 redundancy
Hello,
I have 2 SmartZones and need to know how to configure redundancy (active-Standby)
I've been looking in the manual but I could ...
How to install VSZ on Amazon AWS?
Hi dear forum. I have installed VSZ on VMware server successfully, but now I need to do it on a VPS. It is Possible to intall VSZ on a...
Foundry Switch Firmware Upgrade Order
I have some Foundry FESX424F-PREM switches. They are running version 3.1. I also have IronWare 7.2. Can I jump from 3.1 to 7.2 or are the...
Unsupported AP Models
Hi everybody,This may seem like a silly question, but I would just like confirmation of my assumption.We have our production vSZ-H still ...
FileZilla Settings for Cluster Backup vSZ-E
Hi, I recently changed the PC that hosts filezilla server for all cluster backups. Before I have never had an issue with filezilla and ba...
SCG/SZ AP CLI Script to get info for all APs
I have a need to audit the uplink interfaces for all APs on a monthly basis for PHY link speed (100M, or 1Gbps).Support told me that the ...
Ruckus R500 for home AP???
This is my first experience with any Ruckus product. Without going into too much unnecessary detail, I will need wireless access to my h...
Report on under performing AP's over a custom time period
Hi, we make use of a Virtual Smartzone. Is there a way to pull a report which indicates AP's that are under performing (AP's that are no...
Does R510 support WPA2-PSK or AES encryption?
Does R510 support WPA2-PSK or AES encryption? I bought some new wifi enabled devices that only work on these encryption methods and canno...
Ruckus Cloud down since 5:04 Mountain Standard time on Oct 23 2019. Anyone else?
Seems like Cloud WIFI is down for several hours. Client on site says internet is working (thankfully) but we have no access to our APs. A...
URL filter on SmartZone 5.0 / defined by AccessControl - UserTraffic
When I want to active an URL-filter for porn, do I activate it on WLAN-side or AccessControl-UserTraffic? For me it works well on WLAN-d...