This is the first maintenance release for 9.7
The ZoneDirector images are available now. Images for standalone AP's are still being posted.
This release includes important bug fixes. Please read the Release Notes for details.
[edited to correct version...]
The ZoneDirector images are available now. Images for standalone AP's are still being posted.
This release includes important bug fixes. Please read the Release Notes for details.
[edited to correct version...]
- 860 Posts
- 52 Reply Likes
Posted 6 years ago
J's_Technical_Division Engineer
- 12 Posts
- 0 Reply Likes
Hi Keith,
I found a mistake in the release notes.
Version of the Zero-IT did not change from 9.7.0.0.220.
I found a mistake in the release notes.
Version of the Zero-IT did not change from 9.7.0.0.220.
Max O'Driscoll, AlphaDog
- 349 Posts
- 95 Reply Likes
FYI: updated to 9.7.1.0.17 and running for 3 days now with no issues apparent in my relatively small (ZD +12APs) environment.
J's_Technical_Division Engineer
- 12 Posts
- 0 Reply Likes
Could you teach me about the following issue's meaning?
5.1.16. Currently active client monitoring tables can now be sorted by AP name. (ID ER-1184)
Is "AP name" the same as Device name?
5.1.16. Currently active client monitoring tables can now be sorted by AP name. (ID ER-1184)
Is "AP name" the same as Device name?
Max O'Driscoll, AlphaDog
- 349 Posts
- 95 Reply Likes
No and yes! If you edited your device name and AP name to be identical then Yes.
If like me you have given them different names then No. See pics for confirmation...note G2A(ASPIRE). So my AP name ids the "description". Confused, bet you are.
in monitor view - currently connected clients the AP name refers to the device name that is editable in... configure - access point.

If like me you have given them different names then No. See pics for confirmation...note G2A(ASPIRE). So my AP name ids the "description". Confused, bet you are.
in monitor view - currently connected clients the AP name refers to the device name that is editable in... configure - access point.


J's_Technical_Division Engineer
- 12 Posts
- 0 Reply Likes
Hi Max,
Thank you for the reply.
I understand it!
However, why don't you separate Device name and Description?
Thank you for the reply.
I understand it!
However, why don't you separate Device name and Description?
Max O'Driscoll, AlphaDog
- 349 Posts
- 95 Reply Likes
The APs don't move around and they are all same model. The craftroom AP lives on the ceiling of the craftroom. So kept description same as device name.
Just so happens that the G2A unit is new and I knew it previously as ASPIRE so that was descriptive to me! Totally your choice how you do these things.
Meaningful names help both me and the site staff when explaining problems and locations.
Just so happens that the G2A unit is new and I knew it previously as ASPIRE so that was descriptive to me! Totally your choice how you do these things.
Meaningful names help both me and the site staff when explaining problems and locations.
J's_Technical_Division Engineer
- 12 Posts
- 0 Reply Likes
I’m sorry for not explaining sufficiently.
Why don't you separate Device name and Description (and MAC address) on Currently Active Clients columns?
Why don't you separate Device name and Description (and MAC address) on Currently Active Clients columns?
Max O'Driscoll, AlphaDog
- 349 Posts
- 95 Reply Likes
Getting a bit off topic here.
The wording of the column headings in the ZD GUI could do with a small amount of housekeeping for consistency. If you want Ruckus to change it then put in a request.
Screenshot below shows that I leave out a column because in general it's just adding repetition (in my scenario). Location/description/device name are all very similar so no point seeing them all. On Location info I added initials of teaching staff who "own" the room. Minor but useful to me.

The wording of the column headings in the ZD GUI could do with a small amount of housekeeping for consistency. If you want Ruckus to change it then put in a request.
Screenshot below shows that I leave out a column because in general it's just adding repetition (in my scenario). Location/description/device name are all very similar so no point seeing them all. On Location info I added initials of teaching staff who "own" the room. Minor but useful to me.

J's_Technical_Division Engineer
- 12 Posts
- 0 Reply Likes
I understand your policy.
I think that there is no need to change it.
Thank you for the answer!
I think that there is no need to change it.
Thank you for the answer!
J's_Technical_Division Engineer
- 12 Posts
- 0 Reply Likes
I'm sorry for asking you so many times.
Could you teach me how to reproduce the following issue's ?
5.1.5. An issue with APs being unable to join ZoneDirector due to the
default MTU size set on ZoneDirector running on version 9.6. (ID ER-929)
I've used a version 9.7.0.0.220 on ZoneDirector.
5.1.18 An issue with Dynamic VLAN assignment failing due to changes in
the format of the called-station-id value between versions 9.6 and 9.7. (ID ER-1243)
I've used a version 9.6.2.0.13 and 9.7.0.0.220 on ZoneDirector.
5.1.21. An issue with Guest Access that could cause clients to get stuck in
a redirect loop when the management IP address is used for redirection. (ID
ER-1171)
I've used a version 9.7.0.0.220 on ZoneDirector.
5.2.2. An issue with Hotspot service on standalone APs that could allow
clients to remain connected after the configured session expiration time. (ID
ER-1169)
I've used a version 9.7.0.0.220 on ZoneDirector.
Could you teach me how to reproduce the following issue's ?
5.1.5. An issue with APs being unable to join ZoneDirector due to the
default MTU size set on ZoneDirector running on version 9.6. (ID ER-929)
I've used a version 9.7.0.0.220 on ZoneDirector.
5.1.18 An issue with Dynamic VLAN assignment failing due to changes in
the format of the called-station-id value between versions 9.6 and 9.7. (ID ER-1243)
I've used a version 9.6.2.0.13 and 9.7.0.0.220 on ZoneDirector.
5.1.21. An issue with Guest Access that could cause clients to get stuck in
a redirect loop when the management IP address is used for redirection. (ID
ER-1171)
I've used a version 9.7.0.0.220 on ZoneDirector.
5.2.2. An issue with Hotspot service on standalone APs that could allow
clients to remain connected after the configured session expiration time. (ID
ER-1169)
I've used a version 9.7.0.0.220 on ZoneDirector.
- 860 Posts
- 52 Reply Likes
This is a great conversation that's separate from the main topic, so I created a new topic to continue the discussion. Please reference the new topic here: How to reproduce issues described in the release notes
- 78 Posts
- 7 Reply Likes
A software Refresh Release just posted? .30 vs .17? Is this something worth installing? Why is it here if 9.8 is coming out in a couple of days?
- 860 Posts
- 52 Reply Likes
This is a great conversation that's separate from the main topic, so I created a new topic to continue the discussion. Please reference the new topic here: What's in the 9.7.1 Refresh?
Related Categories
-
ZoneDirector
- 2550 Conversations
- 732 Followers
Keith - Pack Leader