ZoneFlex R310 bride or radio bridge

  • 1
  • Question
  • Updated 9 months ago
  • Answered
  • (Edited)
Hi,
I have 6 access point ZoneFlex R310 and I have to put these devices in a building we there isn't the possibility to use a cable. 
So the idea is to use radio bridge for the five devices and use the last device for router connection with cable.
So I try to set R310 like radio bridge...
During the app wizard installation, I see the option Mash so I try to use Mash with default params...but at the end of the operations I have in unleashed wizard page only the first access point where i start the connection and not see the others...
I have to make other operations after app wizard default?

Any suggestion?
Photo of Ivan Ceradini

Ivan Ceradini

  • 2 Posts
  • 0 Reply Likes

Posted 9 months ago

  • 1
Photo of Alex Shalima

Alex Shalima

  • 39 Posts
  • 11 Reply Likes
Hello,

Ruckus calls this technology Smart Meshing. It is not supported with R310s.

http://ruckus-www.s3.amazonaws.com/pdf/product-info/ruckus-product-guide.pdf

In this case I would recommend a Point-to-Point solution. Ruckus makes PtP solutions, but if budget is tight look into Ubiquity NanoStations.