Zone Director: Layer 3 Deployment

  • 1
  • Question
  • Updated 3 years ago
The company I work for deploys wireless services using a Zone Director 3000 and ruckus ap's. For a long time we had just one property to manage, so 1 vlan, i subnet for management. Basically layer 2 deployement. Recently we have taken on another customer, that will require a seperate subnet for management of the ap's but would like to use the same Zone Director for management. We are having a hard time figuring out how to set this up basically as a layer 3 deployment and are having a hard time finding any literature explaining how to deploy this setup.
Photo of Kevin Hutchison

Kevin Hutchison

  • 1 Post
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
Welcome to the Layer3 world Kevin. You will need L2/L3 switches, or multiple interface routers and L2 switches that understand VLANs. Our recommended design is to locate your ZD/APs on one "management" VLAN, and drop your wireless clients into separate/individual customer VLANs, where they can communicate with themselves, but not the other customers. You specify these VLANs under your user WLAN Advanced Options.