Zone Director auto join wi-fi network after power loss

  • 1
  • Question
  • Updated 6 months ago
  • Acknowledged
I have a zone director installed at home with multiple ipads connected to the wi-fi network for home automation control. All the ipads are set to Auto Join the network, however after a power loss they do not auto connect. I have to go to settings and tap on the actual network again, and it then auto connects. I can not seem to find a solution with apple, and wondering if it is something set up on the zone director system? Would love some help please.
Photo of Greg McLeod

Greg McLeod

  • 2 Posts
  • 0 Reply Likes

Posted 6 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2957 Posts
  • 414 Reply Likes
What type of WLAN do you have configured.  I'd think a simple WPA2 PSK client would reconnect if the network went down/came back up.
Photo of Greg McLeod

Greg McLeod

  • 2 Posts
  • 0 Reply Likes
Hi Michael,
I has been set up as WPA. The network comes back up and is visible in wi-fi settings, however you have to re-select it and then it auto connects onto it without needing to enter the password/key.
Would WPA2 be the same? My apologies as my IT knowledge on Networks and the differences between them is limited. It was set up by the home automation people and I have now started trig to resolve some issues that have been there from day one.