Zone Director 1200 upgrade

  • 1
  • Question
  • Updated 5 months ago
  • Answered
Dears
I am asking about the firmware upgrade,do i have to upgrade according to path i.e version by version or i can just download the latest version and upgrade it.
Secondly if i upgraded from version to another version without following the path what is the impact?
Photo of Hashim Shakir

Hashim Shakir

  • 2 Posts
  • 0 Reply Likes

Posted 5 months ago

  • 1
Photo of Martin

Martin, Official Rep

  • 279 Posts
  • 68 Reply Likes
Hi Hashim,
Download the release notes of the version you want to install.
In the release notes it will say the supported upgrade paths, so from which versions you can go to that version.

If your version is not in there, then look one release earlier.

If it is not supported, then the ZD will say it will factory reset after the upgrade.

regards
Martin
Photo of Hashim Shakir

Hashim Shakir

  • 2 Posts
  • 0 Reply Likes
Hi Martin
Thank you for your quick and useful response.
I didn`t configure the zone director yet still on the factory setting.
I understand from your reply that the only impact if i didn`t follow the path is that the zone director will be upgraded but restored to the factory default.
Photo of Martin

Martin, Official Rep

  • 279 Posts
  • 68 Reply Likes
Correct, It will also say that after you have uploaded the image to the ZD.

Regards
Martin
Photo of Todd

Todd

  • 65 Posts
  • 17 Reply Likes
Release notes, very near the beginning are very helpful in determining your upgrade path.