ZF7762-S doesn't connect to the ZoneDirector 1200

  • 1
  • Question
  • Updated 4 months ago
Hello dear colleagues,
I have a ZF7762 with firmware version 9.7.0.0.220 and Ruckus Wireless ZoneDirector ZD1200 with firmware version 9.13.3.0 build 133.
I have a problem with connecting AP to the ZD1200, it even doesn't trying to join. From CLI ap-mode gets "AP is in Stand-Alone mode" output.
Is there any specific configuration to make for connecting to the ZD1200?

Thanks in advance!!
Photo of Ruzanna Zohrabyan

Ruzanna Zohrabyan

  • 2 Posts
  • 0 Reply Likes

Posted 4 months ago

  • 1
Photo of Jakob Peterhänsel

Jakob Peterhänsel

  • 90 Posts
  • 28 Reply Likes
Photo of Ruzanna Zohrabyan

Ruzanna Zohrabyan

  • 2 Posts
  • 0 Reply Likes
Thank you Jakob for fast response!
So if I'll downgrade ZoneDirectory firmware version I can connect my AP to this ZoneDIrectory?
Photo of Jakob Peterhänsel

Jakob Peterhänsel

  • 90 Posts
  • 28 Reply Likes
Yes, I will assume so, but what latest version supports the 7762, I'm not sure.
You will have to go through the Release Notes.
Photo of Paul Van der Cruyssen

Paul Van der Cruyssen

  • 51 Posts
  • 7 Reply Likes
to be sure that the AP is trying to connect to the controller, use this command at the cli: set director ip x.x.x.x (x.x.x.x is the ipaddress of the controller), then you could check in the logfiles that the AP is trying to connect, but if the AP is not supported... then there is no chance to use that combination of AP and controller
Photo of Martin

Martin, Official Rep

  • 245 Posts
  • 60 Reply Likes
Hi,
You can take for example 9.12.3.x.x that still supports the 7762.

In the release notes we mention the AP models that are supported.

regards
martin