ZF7372 Upgradefirmware Loop

  • 1
  • Question
  • Updated 3 months ago
  • Acknowledged
I have 
1 x ZD1100 (1112)
10 x ZF7372

Firmwares:


ZD1100:             9.10.2.0.73 (Latest)
4 x ZF7372:        9.10.2.0.73

6x ZF7372:        10.1.1.0.35

I have purchased these 6 AP's from a different person. I suppose he has a ZD1200.

My problem is AP's don't seem to upgradefirmware and keep looping in this state.

ZD log: AP[6c:aa:b3:00:62:40] joins with different firmware/custom file version and is being upgraded.
(This is for all 6 AP's)

I have tried to manually put firmware on AP's but it gives error: bad firmware header magic

Please if some has resolved this issue kindly advise.
Photo of Muhammad Ahmed

Muhammad Ahmed

  • 1 Post
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of krishan parashar

krishan parashar

  • 35 Posts
  • 2 Reply Likes
Upgraded zd firmware 10.x.x
Photo of Michael Brado

Michael Brado, Official Rep

  • 2726 Posts
  • 380 Reply Likes
His ZD1100 can't go to 10.x. 

Try re-flashing the 7372 model APs, with a Solo image, and then connect for the ZD to see/find/upgrade/configure them.
https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...