zf7363

  • 3
  • Question
  • Updated 8 months ago
  • Answered
I found several zf7363 from the warehouse,the product serial number on the back is 967-7363-JP02.I download firmware 9.7.1.0.17 from ruckswireless to update local,But I can't use the products,can't configurate them,can't go back to the original configuration after restarting automaticlly.Is it something wrong during the updating or about the firmware?
Photo of gan kewen

gan kewen

  • 1 Post
  • 0 Reply Likes

Posted 3 years ago

  • 3
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 760 Posts
  • 163 Reply Likes
Hi Gan kewen,

It look like you have devices where were supplied to Japanese ISP by Ruckus. Those devices were preconfigured as per ISP configuration. these devices will WORK only with ISP service to whom these were supplied.

You may have to contact THAT ISP to see if they can help you. Hope this helps.

Cheers.
Photo of Sunil Kumar

Sunil Kumar

  • 1 Post
  • 0 Reply Likes

I had purchased 5 nos. of 967-7363-JP02  Zoneflex 7363 model but I can't access the same due to have no login id & password. Please help.

Regards,

Sunil Kumar

Photo of chavdardinev

chavdardinev

  • 1 Post
  • 0 Reply Likes
Hi
My e mail address is [email protected]
I have the same problem with ruckus like you
Can you help if you find a solution
Thanks in advanced

With best regards
Photo of Michael Brado

Michael Brado, Official Rep

  • 2110 Posts
  • 297 Reply Likes
As Monnat pointed out, those ordering part numbers indicate a Japaneze ISP, whom you must contact for assistance.  Ruckus cannot provide alternative access information.
Photo of minh dung

minh dung

  • 5 Posts
  • 0 Reply Likes
I need original firmware for Ruckus ZF7363. Xeltek SuperPro I loaded machine
Photo of minh dung

minh dung

  • 5 Posts
  • 0 Reply Likes
I need original firmware for Ruckus ZF7363. Xeltek SuperPro I loaded machine