ZD3k upgrade path 9.7 to 9.9?

  • 1
  • Question
  • Updated 3 years ago
What will be the correct update path to ZD 9.9 release when ZD3000 without Smart Redundancy and AP's is running at 9.7.1.0.30?

According list below, do i need to upgrade first to a version on the left side of the list below and after that an upgrade to 9.9 release. Or because ZD3000 current version is higher of 9.7.0.0.220 version I can directly to 9.9 version?

According release notes of ZD 9.9;
Officially Supported 9.9 Upgrade Paths
The following ZoneDirector builds can be directly upgraded to ZoneDirector build
9.9.0.0.212:
• 9.7.0.0.220 (9.7 GA)
• 9.7.1.0.32 (9.7 MR 1)
• 9.7.2.0.9 (9.7 MR 2)
• 9.8.0.0.373 (9.8 GA)
• 9.8.1.0.99/101 (9.8 MR 1)
• 9.8.2.0.15 (9.8 MR 2)
• 9.9.0.0.205 (9.9 GA)
Photo of Arne Staal

Arne Staal

  • 4 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Brian Hoyt

Brian Hoyt

  • 48 Posts
  • 3 Reply Likes
If you are on 9.7.1.30 it sounds like it might have been an early release of the final 9.7 MR1 (.32) and you should be able to upgrade to 9.9 according to release notes. However depending on what AP you have you may want to simply go to 9.7.2 latest build and wait for 9.10 which will be out soon and just skip 9.9 altogether. Seems 9.9 will be a short lived build (a few months).
Photo of Arne Staal

Arne Staal

  • 4 Posts
  • 0 Reply Likes
current AP types: zf7352, zf7372 [incl. a zf7372-e version] and zf7762. Future might be added to the new series. One of the reasons of upgrading.

To be safe, I will go first to 9.7.2.0.9 version and well 9.9/10 version, it depends how quick our customer will decide.
Thanks