ZD3000 and Cisco 3750 Trunk port with native vlan question

  • 1
  • Question
  • Updated 4 years ago
Hello Ruckus Community!

I have typical network topology ISPROUTERL3_SWITCHL2_SWITCHES
L3_SWITCH = WS-C3750X-24S-S does Inter-vlan routing.
My Ruckus ZD3000 is directly connected to L3_SWITCH
ZF Access Points are connected to L2_SWITCHES = WS-C2960S-48FPS-L

Lets say i have 3 VLANs:

254 - IT_MANAGEMENT
10 - WIRELESS_GUEST
11 - WIRELESS_STAFF

I would like to configure port as trunk with allowed vlan 10,11 and native vlan 254 on L3_SWITCHZD3000

trunk with allowed vlan 10,11 and native vlan 254 on L2_SWITCHESZF AP`s

The idea is to manage ZF`s via ZD3000 trough vlan 254 and send regular "user" traffic over vlans 10 and 11.

As of right now when i do trunk with allowed vlan 10,11 and native vlan 254 on L3_SWITCHZD3000 - i and not getting any connection to ZD3000. only if cisco`s port is in access "mode".

Thanks,
Zaur.
Photo of Zaur Nedashkovskiy

Zaur Nedashkovskiy

  • 3 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Rahul Koul

Rahul Koul, Employee

  • 75 Posts
  • 12 Reply Likes
Hi Zaur,

I think you are not able to access the ZD WebUI from your laptop is what you mean when you say "not getting any connection to ZD 3000". Am I correct? Also, I believe that APs are able to connect to the ZD..right?
Photo of Zaur Nedashkovskiy

Zaur Nedashkovskiy

  • 3 Posts
  • 0 Reply Likes
No, i mean that ZD is not accepting any traffic from NATIVE VLAN 254
Photo of Rahul Koul

Rahul Koul, Employee

  • 75 Posts
  • 12 Reply Likes
so are the APs even unable to join the ZD?
Photo of Zaur Nedashkovskiy

Zaur Nedashkovskiy

  • 3 Posts
  • 0 Reply Likes
Correct.

I will post port configurations on Switches tomorrow.
Photo of Rahul Koul

Rahul Koul, Employee

  • 75 Posts
  • 12 Reply Likes
Sure Zaur. I will wait for your response.
Photo of Nikolaus Braun

Nikolaus Braun, Employee

  • 2 Posts
  • 0 Reply Likes
Can you confirm that the native VLAN on each port that is connected to the AP's and the ZD is the management VLAN and also that each port has trunk enabled?
Photo of Dheeraj

Dheeraj, Employee

  • 6 Posts
  • 0 Reply Likes
I agree with Nikolaus ,above mentioned things need to be verified.You can post the port configurations on switch to understand this better.

Waiting for your response!!