ZD3000 doesn't generate IP for web GUI

  • 1
  • Question
  • Updated 12 months ago
Several ZD3000 added to inventory recently boot properly and get to the green light stage, but don't generate IPs to allow me to access web GUI for setup.

I've performed a factory reset - no change.

Any ideas how to fix this?
Photo of Tim Pritchard

Tim Pritchard

  • 3 Posts
  • 0 Reply Likes

Posted 12 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 1979 Posts
  • 275 Reply Likes
If you are pressing the indented F/D button for 8+ seconds before release, the ZD's default IP address is 192.168.0.2 with uid/pw of admin/admin.

You need to pre-set your PC to an IP address in the 192.168.0.x range and connect Ethernet to either front port.

By default, the internal DHCP server will not be enabled.