ZD1112 supports r300

  • 1
  • Question
  • Updated 7 months ago
Hello, how are you?


We have a ZD1112 ZoneDirector controller, 9.6.1.0 build 15. We want to add some ap's, model r300. My question is: does the controller support that ap model?


Thank you in advance for your support.
Photo of Eduardo Morales

Eduardo Morales

  • 4 Posts
  • 0 Reply Likes

Posted 7 months ago

  • 1
Photo of Lasha Chavleshvili

Lasha Chavleshvili

  • 10 Posts
  • 1 Reply Like
yes . it has support
Photo of Eduardo Morales

Eduardo Morales

  • 4 Posts
  • 0 Reply Likes
Thank you very much for your answer 

Look, I have this screenshot of my ZD1112



Regards
Photo of Max O'Driscoll

Max O'Driscoll, AlphaDog

  • 348 Posts
  • 91 Reply Likes
ZD1100 will support R300 from 9.7 firmware. You're running 9.6.

Upgrading to 9.7 needs planning/thinking, read release notes, make config backup.
Think about best time as it might take 60mins to get your network backup as all the APs will upgrade once the ZD has upgraded.

Note: If you go beyond 9.10 you will find that many legacy APs are not supported. Read those release notes.
Don't just download and upgrade expecting everything to work because it might not!
(Edited)
Photo of Eduardo Morales

Eduardo Morales

  • 4 Posts
  • 0 Reply Likes
Thank you very much again

And where can I get version 7? What I did was look for an update from the interface, only that an error appears that it is not found.

I am new to the use of ZD

And yes, it will be something that takes time to implement
Photo of Max O'Driscoll

Max O'Driscoll, AlphaDog

  • 348 Posts
  • 91 Reply Likes
This page:  https://support.ruckuswireless.com/



To download firmware you'll need a support contract in place.
Photo of Eduardo Morales

Eduardo Morales

  • 4 Posts
  • 0 Reply Likes
OK, got it. I really appreciate your help.

I am downloading the new version. Thank you very much.