My ZD1100 is running 9.8.0.0 build 373. I have been trying to upgrade it to 9.8.2.0.15 and it always fails on "insufficient memory" error. I followed KB article 1689 without success.
i don't remember what versions i tried and wich version was working. but i'm sure i was managing it with another browser. may be also try with a different OS.
No change. Tried latest Chrome and same error.
I am unable find any info on flash size. Or any CLI command which would show free space on flash.
Firmware zd1100_9.8.2.0.15.ap_9.8.2.0.15.img is almost 63 MBs.
I assume this shows free RAM: # show sysinfo
Memory Utilization: Used Bytes= 64131072 Used Percentage= 50% Free Bytes= 64036864 Free Percentage= 50%
I've tried Firefox 45.0.1, 45.9 ESR and Internet Explorer 8.
This is not problem of browser but ZD itself.
As you can see in my previous post, half of memory is free and probably it's not sufficient for upgrading. I also have tried different images.
Marian Hercek
thomas fankhauser
but i'm sure i was managing it with another browser.
may be also try with a different OS.
John Taylor
Marian Hercek
I am unable find any info on flash size. Or any CLI command which would show free space on flash. Firmware zd1100_9.8.2.0.15.ap_9.8.2.0.15.img is almost 63 MBs.
I assume this shows free RAM:
# show sysinfo
Memory Utilization:
Used Bytes= 64131072
Used Percentage= 50%
Free Bytes= 64036864
Free Percentage= 50%
John Taylor
https://support.ruckuswireless.com/answers/000001689
Marian Hercek
thomas fankhauser
Marian Hercek
This is not problem of browser but ZD itself.
As you can see in my previous post, half of memory is free and probably it's not sufficient for upgrading. I also have tried different images.
John Taylor