ZD1000 and iPad2 problem | Ruckus Wireless Customer Community

Hello guys,
I created small Wi-Fi network on ZD1000 (9.3.4.0.21) + ZF7363 with rate limit 5Mb up/down, but have problem with old Apple devices (iPad2 with 7.1.1 iOS), it is connect and Internet access work some minutes, after this time iPad2 show good connect status but no Internet access - browser can't open web sites. I found answer - enable 802.11d protocol on wi-fi network. It was help, iPad2 can work fine, but rate limit don't work for him any more. Anybody know how fix this bug on ZD?

RZ3DVP

15 Posts
0 Reply Likes

Posted 6 years ago

6 years ago

Keith - Pack Leader

860 Posts
52 Reply Likes

Unfortunately, there are no further software updates on the ZD1000 as it's quite an old product and has reached End Of Life. However, I also don't see any known issues similar to what you are experiencing.

This is a bit of a long-shot, but you might try taking a backup, factory reset the ZD and then restore the backup. It's not un-heard of for them to get into an odd-state due to successive upgrades, etc.

Comment

6 years ago

RZ3DVP

15 Posts
0 Reply Likes

OK, it's my test network, but very interesting why support 802.11d is canceling rate limit? Not found info about that. Bug?

Comment

6 years ago

Keith - Pack Leader

860 Posts
52 Reply Likes

It's possibly a bug, but odd that it hasn't been reported yet (might be my search-fu is failing) . It's also possibly a fault specific to that ZD and so that's why I recommended the reset.

Comment

6 years ago

RZ3DVP

15 Posts
0 Reply Likes

Thank you Keith, I try reset it. May be anybody else see that bug? How about new ZDs.
New iPad and iPhone 4s, 5 also Android and notebooks - don't have any problems and works fine (rate limits too), my first problem came, when man with iPad2 come to me and showed problem with Internet sites. Of course may be it's Apple problem, but Google search help to me found info about 802.11d with Ruckus wi-fi and it's really resolve problem.
Before return back iPad 2 I checked internet speed (speedtest.net), and see... 30Mbit/s... wow. I uncheck 802.11d box, reconnect to wi-fi and see again - 5Mbit/s.

Comment

6 years ago

RZ3DVP

15 Posts
0 Reply Likes

Keith, I'm sorry, but on one of old topic you write about demo version of FlexMaster.
I want to test this software, but don't found it on site or it's only for premium subscriber?
If it possible may be you can help download it? Thank you.

Comment

6 years ago

RZ3DVP

15 Posts
0 Reply Likes

In my home I use standalone AP zf7982 with latest firmware, and today I had situation when with full signal level on Sony notebook (OS W7 64-bit, radio 2,4GHz with 20MHz channel) it can't ping any station on network... Reconnect to wi-fi network - fix it, but I never see before situation like this on Cisco AP.
I think, may be if AP change channel ("smart select" been enabled) notebook wireless card/driver come to this state? I'm not sure, but it's may be?

Comment

6 years ago

Monnat Systems, AlphaDog

923 Posts
205 Reply Likes

Hello RZ3DVP,

I have also seen similar situation right after channel change happens. May be after that Sony notebook WNIC is not able to scan AGAIN to connect to the AP on a new channel.

Disabling the WNIC, restarting the device also fixes such issues.

try upgrading the Sony notebook WNIC driver and see if it helps.
Also keep AP on a static channel and see if same issue repeats or not.

I hope it helps.

Comment

6 years ago

RZ3DVP

15 Posts
0 Reply Likes

Around me many 2.4 wi-fi networks and maybe AP try changed channel so often.
I fixed channel on AP and hope it help. WLAN drivers on notebook was upgraded.
It's looks like broken pptp tunnel - when system show connected status, but traffic don't move through tunnel.
I seen connecting status on notebook and seen this notebook on my AP, but traffic don't goes.
Thank for you help!

Comment

5 years ago

RZ3DVP

15 Posts
0 Reply Likes

Problem with 802.11d and "rate limit" was resolved when I rebooted nearest AP.
Thank for support and we can close this case.

Comment