Zabbix Unleashed monitoring

  • 2
  • Question
  • Updated 3 days ago
  • Answered
Hello all,

I am trying to monitoring Ruckus Unleashed in Zabbix with SMNP. I have 1 master AP and 4 members APs.

As I have checked, I can monitor this data for the master AP:

.1.3.6.1.4.1.25053.1.15.1.1.1.1.1.0  System name
.1.3.6.1.4.1.25053.1.15.1.1.1.1.2.0  IP Address
.1.3.6.1.4.1.25053.1.15.1.1.1.1.3.0  MAC Address
.1.3.6.1.4.1.25053.1.15.1.1.1.1.8.0  UpTime
.1.3.6.1.4.1.25053.1.15.1.1.1.1.9.0  Model
.1.3.6.1.4.1.25053.1.15.1.1.1.1.12.0  Licensed APs
.1.3.6.1.4.1.25053.1.15.1.1.1.1.13.0  Number of max stations allowed
.1.3.6.1.4.1.25053.1.15.1.1.1.1.15.0  Serial number
.1.3.6.1.4.1.25053.1.15.1.1.1.1.18.0  Software version
.1.3.6.1.4.1.25053.1.15.1.1.1.1.20.0  Country code
.1.3.6.1.4.1.25053.1.15.1.1.1.15.1.0  Number of AP
.1.3.6.1.4.1.25053.1.15.1.1.1.15.2.0  Number of authorized client devices
.1.3.6.1.4.1.25053.1.15.1.1.1.15.13.0  CPU Utilization
.1.3.6.1.4.1.25053.1.15.1.1.1.15.14.0  Memory utilization
.1.3.6.1.4.1.25053.1.15.1.1.1.15.15.0  Number of registered AP
.1.3.6.1.4.1.25053.1.15.1.1.1.15.30.0  Number of All client devices

But I can not obtain any data from member APs. Is there anyway to obtain all this data asking via SNMP to the master AP?

For example to obtain Serial Number of member APs: .1.3.6.1.4.1.25053.1.15.1.1.1.1.15["index","1.3.6.1.4.1.25053.1.15.1.1.1.1.2","{$HOST.IP}"]

Of course creating a macro with Host IP.

Maybe Unleashed mode don ́t allow to obtain all this data from master AP?
For example with .1.3.6.1.4.1.25053.1.15.2.1.1.2.8.1.1.6.216.56.252.34.152.96.0 is possible to obtain MAC address for the members APs. Also you can obtain Ethernet port id, name of the interface, statrus, etc....

Thanks in advanced.


Photo of Wifi Support

Wifi Support

  • 2 Posts
  • 0 Reply Likes

Posted 5 months ago

  • 2
Photo of Michael Brado

Michael Brado, Official Rep

  • 2957 Posts
  • 414 Reply Likes
Hello, only the Unleashed Master AP can be monitored by the SNMP MIBs, and there are no Member AP OIDs I can see.
Photo of Jean Luc OMS

Jean Luc OMS

  • 3 Posts
  • 0 Reply Likes
Hello,

Can you get CPU Util ? the OID always return 0 for me :
RUCKUS-UNLEASHED-SYSTEM-MIB::ruckusUnleashedSystemStatsCPUUtil.0 = Gauge32: 0
RUCKUS-UNLEASHED-SYSTEM-MIB::ruckusUnleashedSystemStatsNumAP.0 = Gauge32: 32
RUCKUS-UNLEASHED-SYSTEM-MIB::ruckusUnleashedSystemVersion.0 = STRING: 200.7.10.102 build 64



Photo of Jean Luc OMS

Jean Luc OMS

  • 3 Posts
  • 0 Reply Likes
Hey, no one monitors unleashed master cpu utilization ?