Wireless Mesh setup with r310 and t300

  • 1
  • Question
  • Updated 4 months ago
  • Answered
I am trying to see about a presales question about wrieless mesh.  I have setup 2 r310, and one t300 running unleashed.  I would like to take one of the r310 and have it be totally wireless.  I have all 3 setup and working while connected to the LAN.  When I unhook one of the r310, it will never connect up via wireless.  I even tried setting up the zero touch Pre-Approved Zero Touch Mesh.  What am I missing?
Photo of James Wagoner

James Wagoner

  • 3 Posts
  • 0 Reply Likes

Posted 9 months ago

  • 1
Photo of Nikita Zaiko

Nikita Zaiko

  • 9 Posts
  • 2 Reply Likes
Unfortunately R310 does not support mesh


Photo of James Wagoner

James Wagoner

  • 3 Posts
  • 0 Reply Likes
well that would do it...I thought I looked this up good thing this is just in our lab.  Does the r510?
Photo of Darrel Rhodes

Darrel Rhodes, Employee

  • 200 Posts
  • 113 Reply Likes
Hi James,

As mentioned by Nikita; R310 does not support SmartMesh and neither does R320 (and R300).

You would need to upgrade the AP to R500/R510 to utilise SmartMesh.

HTH,
Darrel.
Photo of James Wagoner

James Wagoner

  • 3 Posts
  • 0 Reply Likes
Thanks all!
Photo of Marc Silver

Marc Silver

  • 2 Posts
  • 0 Reply Likes
Can a R310 mesh to a R510 wirelessly?
Photo of Marc Silver

Marc Silver

  • 2 Posts
  • 0 Reply Likes
Can a R310 mesh to a R510 wirelessly?
Photo of hayk

hayk

  • 387 Posts
  • 59 Reply Likes
No since the R310 does not support mesh...