Wireless Configuration in Web GUI Not Appear Ruckus R600

  • 1
  • Question
  • Updated 4 months ago
  • Answered
I want configure wireless but the menu absent in web GUI. Anybody can help me to bring back the menu.
Photo of NESS USS

NESS USS

  • 3 Posts
  • 0 Reply Likes

Posted 4 months ago

  • 1
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 918 Posts
  • 191 Reply Likes
pls confirm the software version on the AP.
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 918 Posts
  • 191 Reply Likes
you are running software version which does not allow WiFi/Radio configuration ...
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 918 Posts
  • 191 Reply Likes
go here -- https://support.ruckuswireless.com/software/1018-zoneflex-r600-indoor-ap-104-0-0-0-1347-ga-software-...

download this firmware and upgrade your AP. After upgrade, you will get relevent options...
Photo of Martin

Martin, Official Rep

  • 235 Posts
  • 54 Reply Likes
Correct as Monnat mentioned the 3.4.0 version is actually a controller managed version, which means the AP is managed by a controller. So if you want to change it within this, you need to login to the controller itself.

if you want to use the AP now as standalone then the 104 or unleashed software should be used.

regards
Martin
Photo of Michael Brado

Michael Brado, Official Rep

  • 2336 Posts
  • 319 Reply Likes
And to change from a controller managed version to Solo or Unleashed, you need to do a Hard Reset on your AP,
reverting it to a 192.168.0.1 IP address, with super/sp-admin login credentials.  Best to do this off your network.
Photo of NESS USS

NESS USS

  • 3 Posts
  • 0 Reply Likes
Thanks a lot all friends. Problem solve.