Windows 10 laptop wifi issue with radius

  • 1
  • Question
  • Updated 3 weeks ago
  • Answered
We have Ruckus SZ 100 with almost 100 APs setup with Radius configuration its an multi location setup the problem what i am having is our MD's Windows 10 laptop working fine in HO but when if he roam to Branch office A and B its get connected automatically without any problem But whenever its go to Branch office C its not get connected automatically what we need to do is go to intel wireless proset utility from there we need to connect and its get connected i understand its an adapter behavior to connect or not.

but my question how its automatically get connected to wireless at HO and Branch office A and B if its an adapter behavior then what exactly basis its get connected to HO and other branch except Branch C ?

Configuration is same on all the location.

any idea to find root cause?

Regards,
Shoeb
Photo of Shoeb Qureshi

Shoeb Qureshi

  • 10 Posts
  • 2 Reply Likes

Posted 2 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3008 Posts
  • 424 Reply Likes
My idea would be to review logs with Tech Support!  It might take some network analysis.
https://support.ruckuswireless.com/contact-us
Photo of Shoeb Qureshi

Shoeb Qureshi

  • 10 Posts
  • 2 Reply Likes
Ok will do that..

Thank You !!!!!
Photo of Mohamed MESSAI

Mohamed MESSAI

  • 1 Post
  • 0 Reply Likes

Hi Shoeb , we have the same issue  , do you have solution ? thanks
Photo of James bond

James bond

  • 1 Post
  • 0 Reply Likes
I too have faced these issue on my Windows 10 laptop and was unable to fix the problem. Then after updating the Windows 10 I have faced a critical issue which I am unable to fix that is Windows Activation Error Code 0x80072F8F