Why ZD1205 does not work with the ZF7363?

  • 1
  • Question
  • Updated 6 months ago
  • Answered
The access point ZF7363 is not connected to the controller ZD1205 (9.10). What to do?
Photo of Andrey Skorobogatov

Andrey Skorobogatov

  • 11 Posts
  • 1 Reply Like

Posted 2 years ago

  • 1
Photo of Eizens Putnins

Eizens Putnins

  • 107 Posts
  • 42 Reply Likes
9.10 still supports ZF7363, so it must work. Factory reset AP, than log  to AP through SSH ,  send command: "set director ip xxx.xxx.xxx.xxx" (xxx means ZD IP address, of cause), reboot. Than AP must find ZD. If still unsuccessful, check if it has ZD version software, not SCG version.
This you can check from SSH: "get scg", it will get error if it is software for ZD, and scg setting status if it's SCG version.
Photo of Andrey Skorobogatov

Andrey Skorobogatov

  • 11 Posts
  • 1 Reply Like
Where to get the SSH-settings to access the access point?
port
login
password
Photo of Rahul Koul

Rahul Koul, Employee

  • 75 Posts
  • 12 Reply Likes
Hello Andrey,

The Ruckus APs use the standard TCP port 22 for SSH and the default user name is "super" and password "sp-admin" for all the APs unless you change it to something else.

Regards,
Rahul
Photo of Andrey Skorobogatov

Andrey Skorobogatov

  • 11 Posts
  • 1 Reply Like
Nothing helps, what to do?
(Edited)
Photo of Andrey Skorobogatov

Andrey Skorobogatov

  • 11 Posts
  • 1 Reply Like
I changed the firmware on the access point (9.4).Now it works!
Photo of minh dung

minh dung

  • 5 Posts
  • 0 Reply Likes
I need original firmware for Ruckus ZF7363. Xeltek SuperPro I loaded machine