why can not using the sampe ip address ?

  • 1
  • Question
  • Updated 2 months ago
Hi guys, when i first setup virtual smartzone 3.6.1 in the option section for control,cluster,management. I have to fill in the ip address alternately. Why can not use the same ip address ?
Thanks
Photo of OnoE

OnoE

  • 10 Posts
  • 0 Reply Likes
  • confused

Posted 2 months ago

  • 1
Photo of James M

James M, Employee

  • 3 Posts
  • 1 Reply Like
Hello Tryono,

By default, the .ova builds a VM with 3 network interfaces. it sounds like you just want to build a 1-interface vSZ.

If you want to build a SZ with a single IP, then follow these steps:

1. Power-off the VM
2. Go to the VM settings, delete virtual NICs 2 & 3
3. Power-up the VM.

Continue with the set-up steps again.

James
Photo of OnoE

OnoE

  • 10 Posts
  • 0 Reply Likes
Hello James,

ok i will try it. thanks before.
Photo of OnoE

OnoE

  • 10 Posts
  • 0 Reply Likes
Hi James, how if disconnect port ? is it the same with delete interface ?
Photo of OnoE

OnoE

  • 10 Posts
  • 0 Reply Likes

Photo of Paul Van der Cruyssen

Paul Van der Cruyssen

  • 58 Posts
  • 9 Reply Likes
depends on how network interfaces you have, default the image has 3 interfaces, you can remove 2 interfaces before running the first time, then you only can/have to use one ipaddress
Photo of OnoE

OnoE

  • 10 Posts
  • 0 Reply Likes
Hi Paul, thanks, i will try remove 2 interface.
Photo of OnoE

OnoE

  • 10 Posts
  • 0 Reply Likes
Hi Paul, how if the disconnect port ? Is it the same with remove interface ?
Photo of Karthik

Karthik, Employee

  • 11 Posts
  • 3 Reply Likes
Hi ONOS,

Remove the interfaces. While the vSZ comes online for the first time it will check the interfaces available in VM and assign to mgmt, ctrl, clstr. Disconnecting means still its available, still vSZ will assign as 3 interfaces.
Simply, after you deploy VM image, delete NIC2 and 3 and first-start. Note: VM wizard in VMware has default option to start VM, You may need to uncheck that.

HTH
Karthik
Photo of OnoE

OnoE

  • 10 Posts
  • 0 Reply Likes
Hi Karthik,

Thanks, i have been delete the interface and working right now.
Photo of Paul Van der Cruyssen

Paul Van der Cruyssen

  • 58 Posts
  • 9 Reply Likes
Great!