Where do you reboot your SmartZone 100 sz100?

  • 1
  • Question
  • Updated 4 weeks ago
  • Answered

I have been all over the interface and still cannot locate a place where you can click on a button that will reboot the smartzone 100.

SZ100 firmware is: 3.5.0.0.832

Thought it used to be under the user icon at the top right of the screen, but it's not there anymore.

I can always yank the power cord out but did not want to do that.

Any help would be appreciated.

Photo of brian koomen

brian koomen

  • 11 Posts
  • 0 Reply Likes

Posted 1 month ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
The CLI command is "reload".
Photo of brian koomen

brian koomen

  • 11 Posts
  • 0 Reply Likes

No GUI option to reboot/reload the unit?


Are you telling me the only way to reboot the SZ100 is through the CLI?

(Edited)
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
There is also a hardware on/off switch, next to where you would yank out the power cord to reboot it.
Photo of Mitchell Axtell

Mitchell Axtell

  • 63 Posts
  • 17 Reply Likes
It's in the cluster menu- System > Cluster > Click on the controller > Restart just above.
Photo of brian koomen

brian koomen

  • 11 Posts
  • 0 Reply Likes

Thanks.

Under Cluster???  Hmmm.  Interesting place for it to be located.

Photo of Mitchell Axtell

Mitchell Axtell

  • 63 Posts
  • 17 Reply Likes
It's not a bad place when you consider that it allows you to reboot other member controllers without logging into them directly.  The SZ is a lot more aware of other devices than ZDs were.
Photo of brian koomen

brian koomen

  • 11 Posts
  • 0 Reply Likes

Very true.  Guess I am still getting use to the new interface.