When will unleashed support independent configuration of 2.4Ghz and 5GHz SSIDs?

  • 1
  • Question
  • Updated 2 weeks ago
The standalone firmware supports independent configuration while just about every consumer AP supports independent configuration. When is Ruckus going to add this feature to its $1000 APs?

My Apple devices do not handle the 2.4Ghz and 5GHz sharing the same SSID very well such that throughput is not maximized. I use an 80MHz 5GHz channel for high throughput and a 20MHz 2.4GHz channel for distance. Given the relatively light usage in my enviornment, the correct decision in my environment is to stay on 5GHz as much as possible only go to 2.4GHz when it is clear that a weak 5GHz signal cannot be maintained, but that does not happen. That is why I do things manually with the standalone firmware so that I can manually pick which device will use what band. Now that there is the issue with KRACK, I want to enable the rogue AP containment feature, but it is absent from the standalone firmware while switching to unleashed is going to cause performance problems. :/
Photo of Richard

Richard

  • 6 Posts
  • 1 Reply Like
  • Frustrated

Posted 2 weeks ago

  • 1
Photo of thomas fankhauser

thomas fankhauser

  • 16 Posts
  • 5 Reply Likes
AFAIK Apple devices prefer 5GHz and stay on the 5GHz as long as possible.
if you run more accesspoints, it is best to use a controllerbased firmware or the unleashed.
you can't benefit if you use standalone firmware.
let the devices (AP and cilent) do the decisions.
Photo of Richard

Richard

  • 6 Posts
  • 1 Reply Like
1 AP is all that I need for coverage of almost everything on 5GHz. There are a few extreme areas that need 2.4GHz, but I am okay with letting them just use it. Anyway, once an Apple device drops to 2.4GHz, it won't go back to 5GHz even if the signal is far better.
Photo of NorcalEDU

NorcalEDU

  • 16 Posts
  • 2 Reply Likes
This has been one of the things I have been looking for as well, and with theĀ 200.5 code you can.

Here is how:

Wireless Networks -> (Choose SSID) and click 'Edit' -> 'Show Advanced' -> Radio Control Tab (look at the bottom).
Photo of Richard

Richard

  • 6 Posts
  • 1 Reply Like
Great. Thanks. :)