what the difference tunneling vs. LBO (local break out)

  • 1
  • Question
  • Updated 8 months ago
  • Answered
I would like to ask what the difference tunneling vs. LBO (local break out), can explain, because I do not have any information about the documentation.
Photo of Hafiz heryanto

Hafiz heryanto

  • 1 Post
  • 0 Reply Likes

Posted 8 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2114 Posts
  • 297 Reply Likes
If your WLAN is tunneled, all client traffic goes back thru an encapsulated tunnel to the ZoneDirector,
and then onto the network (ie at the data center).  Local break out, means the client traffic goes onto
the network at the AP (ie at the site).

Whether locally at the AP, or tunneled back to the ZD, you would need the Client WLAN's VLAN at the
switch port where the client traffic hits the network.
Photo of David Henderson

David Henderson

  • 85 Posts
  • 13 Reply Likes
Tunnel requires less vlans on the switchport since traffic will be placed on the proper vlan at the controller
Breakout at the edge should improve performance since the traffic can go from the wireless device to its destination without being routed through controller
Ruckus prefers breakout at the edge. This is what we did but it did take some extra work on our core switch and edge switches