Web GUI over rj45 management port only

  • 1
  • Question
  • Updated 1 month ago
  • Answered
Is it possible to allow web GUI access only through the management port? Im running an ICX 7150 24P.

Thanks
Photo of Fernando Flórez

Fernando Flórez

  • 22 Posts
  • 6 Reply Likes

Posted 1 month ago

  • 1
Photo of Dacvar

Dacvar, Employee

  • 3 Posts
  • 1 Reply Like
Hello Fernando

Is not possible to configure web management access only through the management port.

Is possible to set a VLAN or specific ports to be able to access but not the management port specifically on this case.

An option could be to create a management VLAN and assign a port or ports to it and use them only for management access.

The options you have to configure web management access is as follows:

"web-management enable { vlan vlan-id | ethernet unit/slot/port [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ] "

For example to enable it of r a specific VLAN:
"web-management enable vlan 10"

- For a specific port: "web-management enable Ethernet 1/1/1"

-For a group of ports: "web-management enable Ethernet 1/1/1 to 1/1/5 "

I hope this information is usseful.

Regards.




Photo of Fernando Flórez

Fernando Flórez

  • 22 Posts
  • 6 Reply Likes
Thank you!