vSZ - Provision AP against a DNS record

  • 1
  • Question
  • Updated 2 years ago
Is there any way to use a DNS entry instead of an IP when provisioning the AP against the controller?

Currently this is the way : 
set scg ip xxx.xxx.xxx.xxx

is there anything, or will there be a feature that will allow me to run

set scg url vsz.domain.com ?

Photo of Andrew M

Andrew M

  • 15 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Robin T

Robin T

  • 1 Post
  • 0 Reply Likes
This would be awesome and much better since you sometime have to change IPs when moving och updating server. This way no one has to edit all APs if there is a move of the vSZ
Photo of Andrew Giancola

Andrew Giancola

  • 238 Posts
  • 74 Reply Likes
Don't take the 'IP' part of the command literally.
I run all my APs like this `set scg ip hostnameofcontroller.com enable`
doing this, my current "get scg".

rkscli: get scg

------ SCG Information ------

SCG Service is enabled.

AP is managed by SCG.


Server List: 54.x.x.x,172.31.x.x,172.31.x.x,172.31.x.x,34.x.x.x.154,34.212.x.x

SSH tunnel connected to 34.x.x.x

Failover List: Not found

Failover Max Retry: 2

DHCP Opt43 Code: 6

Server List from DHCP (Opt43/Opt52): Not found

SCG default URL: RuckusController

SCG config|heartbeat intervals: 30|30

SCG gwloss|serverloss timeouts: 1800|0