vSZ-H - AAA proxy and user roles

  • 1
  • Question
  • Updated 4 years ago
Hi Guys,

I have some troubles with User Roles on vSZ-H. The controller is in proxy mode. Authentication and dynamic VLAN assignment is working fine, but mapping User Roles -> User Traffic profile is not working.

I can see on the Freeradius, that attribute is sent.

From the FreeRADIUS:


Sending Access-Accept of id 73 to port 30012

        Tunnel-Type:0 = VLAN

        Tunnel-Medium-Type:0 = IEEE-802

        Ruckus-User-Groups = "RDNTRIS"

        MS-MPPE-Recv-Key = 0x9a2cbb6e44b19b5572caa26263367bb6d4b6642abb7189fa486db546f930c877

        MS-MPPE-Send-Key = 0x4413e4f9bb965ad4d684f0089b9d937c9de845dd9ca878c3011c5295347ee8e3

        EAP-Message = 0x030a0004

        Message-Authenticator = 0x00000000000000000000000000000000

        User-Name = "master2"

        Proxy-State = 0x3230

Any idea? 

Thank you in advance.

Photo of Michal Dolejsi

Michal Dolejsi

  • 3 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1

There are no replies.