Uploading Image for Ruckus 7150

  • 1
  • Question
  • Updated 7 months ago
  • Answered
I tried to upload image for ICX7150-C12-POE and it was succesful
But when i show version, I saw information as below

BYT-Ruckus-Spare#show version 
  Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.
    UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
      (24723488 bytes) from Primary SPR08090c.bin
        SW: Version 08.0.61aT211 
      Compressed Boot-Monitor Image size = 786944, Version:10.1.15T225 (mnz10115)
       Compiled on Thu Jan 31 07:08:55 2019


 
Please have a look at the line
"UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
      (24723488 bytes) from Primary SPR08090c.bin"
Something wrong here
Could you give me advice this case please??

Thank you very much
Photo of Thanh Tien Ton That

Thanh Tien Ton That

  • 9 Posts
  • 0 Reply Likes

Posted 7 months ago

  • 1
Photo of Simon

Simon, Employee

  • 88 Posts
  • 48 Reply Likes
Hi

What is the output for show flash ?

Note that when upgrading from 8.0.61 to .90 it is a two stage process, you should first do a standard upgrade using the manifest file and then a second upgrade using the .90 UFI image. The upgrade guide has more details https://docs.arris.com/bundle/fastiron-08090-upgradeguide/page/GUID-5DD7EE86-6988-4CA7-81D2-22EA77BD1992.html 
Photo of Jijo Panangat

Jijo Panangat, Employee

  • 102 Posts
  • 35 Reply Likes
Hi,

The image you copy/upload goes to the flash. ICX has primary and secondary partitions. The show version can only tell you the partition from which the system booted up.


Thanks
Jijo 
Photo of Thanh Tien Ton That

Thanh Tien Ton That

  • 9 Posts
  • 0 Reply Likes
I uploaded SPR08090c before then i uploaded SPS08061a
It should be shown "from Primary SPS08061a".
What should i do to make it correct now ?
Photo of Simon

Simon, Employee

  • 88 Posts
  • 48 Reply Likes
What is the output for show flash ?

Photo of Thanh Tien Ton That

Thanh Tien Ton That

  • 9 Posts
  • 0 Reply Likes
BYT-Ruckus-Spare>show flash 
Stack unit 1:
  Compressed Pri Code size = 24723488, Version:08.0.61aT211 (SPR08090c.bin)
  Compressed Sec Code size = 24723488, Version:08.0.61aT211 (SPR08090c.bin)
  Compressed Boot-Monitor Image size = 786944, Version:10.1.15T225
  Code Flash Free Space = 1197801472

Version 08.0.61aT211 (SPR08090c.bin) what does it mean???
Photo of Simon

Simon, Employee

  • 88 Posts
  • 48 Reply Likes
Something has gone wrong with the upgrade, I've not seen anything like that before. I would suggest repeating the upgrade to 8.0.90 using the manifest file, reload, and then upgrade to 8.0.90 UFI image.