Upgrading standalone AP via TFTP

  • 1
  • Question
  • Updated 4 years ago
  • Answered
I have many 7363 APs. I also have a ZD1100. I have upgraded the firmware on all APs using the ZD1100, but when I operate them in stand-alone mode it appears they run a separate firmware. I am unable to upgrade beyond 9.4 using the TFTP method as the AP reports insufficient memory to do the upgrade.

How do I upgrade my 7363 APs to the latest stand-alone 9.6.x firmware?

Thanks!

Note: This topic was created from a reply on the Unable to perform firmware upgrade on a Standalone AP topic.
Photo of Andrew Martin

Andrew Martin

  • 2 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 51 Reply Likes
The easiest way is to use the 'Local' option which should be available on anything higher than 9.0. Download the image from the support site to your PC, then just hit the Upgrade button and upload that file. If it still reports a memory error, please open a support case.