HtH: Upgrading ZoneDirector Firmware - New Videos and Articles

  • 2
  • Announcement
  • Updated 5 months ago
  • (Edited)
Having trouble upgrading your ZoneDirector firmware? Find the information you need in the following new videos, articles, and docs.

 

Videos

Upgrading ZoneDirector via the GUI

Upgrading ZoneDirector in Smart Redundancy Setup via GUI

Upgrading ZoneDirector via the CLI

 

Knowledge Base Articles

ZD firmware upgrade in smart redundancy setup

Firmware upgrade on ZoneDirector via WebUI

How to upgrade theZoneDirector firmware from CLI using TFTP

Recommended firmware and suggested upgrade path for ZoneDirector

Troubleshooting upgrade failure on ZoneDirector

Best Practices for ZoneDirector Firmware Upgrade

ZD is not responding after upgrade failure

 

Technical Documentation

Ruckus ZoneDirector 10.2 Upgrade Guide

 

All of this content and more can be found on the Ruckus Support How-To Hub. The How-To Hub is a collection of videos, knowledge articles, and technical documentation created specifically to address some of the most common Customer Support issues. Check it out at https://support.ruckuswireless.com/how-to-hub.

 

Was this information helpful? Do you have suggestions for other topics to cover in the How-To Hub? Submit your own How-To ideas and feedback at https://support.ruckuswireless.com/feedbacks .
Photo of Michael Brado

Michael Brado, Official Rep

  • 2955 Posts
  • 414 Reply Likes

Posted 5 months ago

  • 2

Be the first to post a reply!