I have a mm2211 model ap with customized firmware. I am unable to manage the ap.I successfully connected a serial console to it. Need help for flashing original firmware via tftp.
- 6 Posts
- 0 Reply Likes
Posted 4 years ago
Michael Brado, Official Rep
- 2679 Posts
- 369 Reply Likes
If you factory default the mm2211 with a paperclip in the hard reset hole for 8 sec,
it should reply to 192.168.30.1 with login credentials super/sp-admin. Here are the
latest firmware code and control file to put on your FTP/TFTP server. Use the GUI
as it's much easier to use for upgrade, than the serial console CLI.
ftp://ftp.ruckuswireless.com/downloads/support/fwcntrl_mm2211.rcks
ftp://ftp.ruckuswireless.com/downloads/support/2211_4.4.2.0.79.BL7
it should reply to 192.168.30.1 with login credentials super/sp-admin. Here are the
latest firmware code and control file to put on your FTP/TFTP server. Use the GUI
as it's much easier to use for upgrade, than the serial console CLI.
ftp://ftp.ruckuswireless.com/downloads/support/fwcntrl_mm2211.rcks
ftp://ftp.ruckuswireless.com/downloads/support/2211_4.4.2.0.79.BL7
- 6 Posts
- 0 Reply Likes
Thanks for a fast reply.
I alredy tried hard reset but the firmware in device both backup and main are customized.so hard reset not working.
Given links of firmware and control file are not working.
Please give me correct links for download. It would be helpful if there is a guide available for tftp or serial flashing.
I alredy tried hard reset but the firmware in device both backup and main are customized.so hard reset not working.
Given links of firmware and control file are not working.
Please give me correct links for download. It would be helpful if there is a guide available for tftp or serial flashing.
Michael Brado, Official Rep
- 2679 Posts
- 369 Reply Likes
Sorry Shailrndra, if the fw is customized, it was OEM'd by an ISP and Ruckus cannot help modify the configuration.
- 6 Posts
- 0 Reply Likes
No problem.
But when i download ftp://ftp.ruckuswireless.com/downloads/support/2211_4.4.2.0.79.BL7 it shows a error 550 failed to change directroy.
So please provide firmware only.i
But when i download ftp://ftp.ruckuswireless.com/downloads/support/2211_4.4.2.0.79.BL7 it shows a error 550 failed to change directroy.
So please provide firmware only.i
Michael Brado, Official Rep
- 2679 Posts
- 369 Reply Likes
Ah, the filename has a little "L" not Caps.
ftp://ftp.ruckuswireless.com/downloads/support/2211_4.4.2.0.79.Bl7
You might need to edit the fwcntrl_mm2211.rcks file if it has a big "L" in the filename.
ftp://ftp.ruckuswireless.com/downloads/support/2211_4.4.2.0.79.Bl7
You might need to edit the fwcntrl_mm2211.rcks file if it has a big "L" in the filename.
- 6 Posts
- 0 Reply Likes
- 2 Posts
- 0 Reply Likes
@Michael Brado,
How do i use tftp to flash mm221?
please share, thank you
How do i use tftp to flash mm221?
please share, thank you
Michael Brado, Official Rep
- 2679 Posts
- 369 Reply Likes
Khalid, from Maintenance::Upgrade page, click TFTP method and enter the serveri IP address. Place the two files (firmware and image control file) in the TFTP root
directory on your server. Click Perform Upgrade.
directory on your server. Click Perform Upgrade.
- 2 Posts
- 0 Reply Likes
Hi Micheal,
Really appreciate your quick response.:)
Any other way to flash it without webUI?? any flash tool???
Thank you
Really appreciate your quick response.:)
Any other way to flash it without webUI?? any flash tool???
Thank you
Michael Brado, Official Rep
- 2679 Posts
- 369 Reply Likes
No "flash tool", only firmware upgrades by TFTP/FTP/WEB/Local.
It the device has an OEM customized firmware, we cannot assist further.
It the device has an OEM customized firmware, we cannot assist further.
- 9 Posts
- 1 Reply Like
- 9 Posts
- 1 Reply Like
i want to know because i also have the same situation and need your help.??
- 9 Posts
- 1 Reply Like
- 1 Post
- 0 Reply Likes
For Ruckus from tikona you can use the below steps on this link
http://amitwattamwar.blogspot.in/2015/07/how-to-reset-ruckus-m2211-metro.html
once you reset you can update from the update option in the admin console.
http://amitwattamwar.blogspot.in/2015/07/how-to-reset-ruckus-m2211-metro.html
once you reset you can update from the update option in the admin console.
(Edited)
Michael Brado, Official Rep
- 2663 Posts
- 368 Reply Likes
The process is the same to reset a Ruckus mm2211. If you have a Tikona or custom OEM AP, the administrative login credentials will not be the same as Ruckus.
Michael Brado, Official Rep
- 2663 Posts
- 368 Reply Likes
Then you use those Ruckus admin login credentials on your Serial connection, ie your original question.
- 9 Posts
- 1 Reply Like
well thanks amit but it wont work for a customized software device.
Michael Brado, Official Rep
- 2663 Posts
- 368 Reply Likes
You need to contact the ISP whom you got the customized mm2211 from.