Unleashed solution, remote mangement and monitoring

  • 1
  • Question
  • Updated 4 years ago
I have Installed an Unleashed solution, I want to monitor and manage this solution remotely, but i cant do a Port Address translation, Do somebody know the rule for example in a mikrotik router to do this?
Photo of Fabian Garzon

Fabian Garzon

  • 6 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Kenny Bok

Kenny Bok

  • 5 Posts
  • 1 Reply Like
just forward your port to unleashed master AP IP with https port 443 and everything is fine
Photo of Michael Brado

Michael Brado, Official Rep

  • 3298 Posts
  • 523 Reply Likes
Good morning,

    But the Master AP can change, depending on network conditions...  Fabian, you would need to
be able to monitor all Unleashed AP IP addresses, in our current 200.1 firmware.  But, good news,
our next release of Unleashed 200.2 will introduce a Virtual IP (VIP) that all Unleashed APs will use
as their Master IP.  After this next release, you will be able to monitor the Unleashed VIP remotely
and always be looking at the active Master AP information.

   ... And, product marketing has introduced SNMP for Unleashed.  MIBs for current
are availble for download, and an SNMP Reference Guide is also available.
Photo of Fabian Garzon

Fabian Garzon

  • 6 Posts
  • 0 Reply Likes
Michael Thanks, Do Yo Know when is going to be released this 200.2 version?