Unable to power recent model APs with newer model PowerDsine 9524

  • 1
  • Question
  • Updated 4 years ago
  • Doesn't Need an Answer
I am unable to POE any recent model ruckus APs with a PowerDsine 9524 (this is a newer model midspan). They will power up with a PowerDsine 9024. The 9524 has no issue powering other POE devices or older model ruckus APs. I've tried over 5 different current models of AP's with no success. The PowerDsine 9524 is in a default configuration. Any suggestions?
Photo of James Anderson

James Anderson

  • 2 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 51 Reply Likes
James, I've opened a case for you off this post. A support engineer should be contacting you shortly.
Photo of James Anderson

James Anderson

  • 2 Posts
  • 0 Reply Likes
Two of the newer AP's were zoneflex 7372 & 7363. The older model was a 7962 (dome style).

Change to PowerDsine 9564 default status has powered up the newer AP's. Specific change was System Configuration - Product Parameters: System Detection Method (PD Detection Method) changed from 'IEEE802.3af + IEEE802.3at' to 'IEEE802.3af + IEEE802.3at + Legacy'.

At least now I can power up the AP's.
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 51 Reply Likes
James, thanks for the update. We're looking into whether this is expected behavior or not, but your information will certainly help other customers, so much appreciated!