Unable to access Director Login Page

  • 1
  • Question
  • Updated 2 months ago
  • Acknowledged
I am trying to log into the Zonedirector 1100.  When I type in the IP Address of the zone director I am redirected to http://x.x.x.x/ToHttps.jsp.

I have tried using IE, Firefox, Chrome, Edge and all behave the same
I have rebooted the zonedirector and I have tried logging in via the wired network.

any suggestions?
Photo of corey arndt

corey arndt

  • 3 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of Syamantak Omer

Syamantak Omer, Official Rep

  • 478 Posts
  • 156 Reply Likes
Hi Corey,

It seems ZD's management ACL is enabled and it is not letting you access the GUI.

If you know what IP/subnet is allowed on management ACL then you can access the ZD.

If not, you have to access ZD using it's console port and disable the management ACL.

Refer below article for more information.


Syamantak Omer
Photo of Tommy Galuszka

Tommy Galuszka

  • 4 Posts
  • 0 Reply Likes
Easiest way to fix this is to upgrade its firmware to I believe anything after 9.8 via tftp.  I have had this happen on older zd1100s that were firmware neglected.
Photo of Syamantak Omer

Syamantak Omer, Official Rep

  • 345 Posts
  • 123 Reply Likes
Hi Tommy,

What you are referring is a different issue with ZD 9.5 version where TLS 1.2 cipher suite is not supported, so modern browsers will not allow a connection (modern browsers stopped TLS 1.0 long back) and you get an error on page ,when you access it.

Syamantak Omer